pipes

Recent contents Top users
  1. Big Si

    Dave Platt "shotgun" pipes

    Hi All, Ordered some of the above a few days ago, the bike is on the lift eagerly awaiting their arrival!!:cool:
  2. Mad Dog

    Cams, Pipes & Clutch upgrade

    Here are the parts, cams, tensioner, pipes, MTC clutch fibers, Carpenter springs on the way, detent spring, gaskets, crankcase evac. nipple & back check, hoses. What is missing?
  3. AussieMick

    Nev Lush Tune on CES pipes

    Well the bike is getting to where I want it to be. I brought the 2 1/4 inch CES Racing headers and short muffler to replace the Dave Platt shorties and crossover twhich by the way are on sale very cheap). The CES system is ceramic coated inside and out and a beautiful piece of work, looks great...
  4. Grumpy Ole Codger

    New pipes are in the post..

    Ladies and Gentlemen of the forum, I would like you to cast a critical eye over the photos below. I have opted to purchase a new exhaust system from @Paul Bryant , a new twin pipe system which was only a prototype previously. After many discussions which included an awful lot of advice and...
  5. Navigator

    For Sale Stock Touring mufflers but actually free

    The OEM mufflers are sitting on my shop floor on a piece of cardboard. I'm making a dump run on Friday and thought if someone needed a set, I'd pass them on. Of course local is preferred since shipping them might be stupidly expensive. If no takers by Friday, to the land fill they go.
  6. skaarlaj

    Am I the only one who loves the factory exhaust pipes?

    Hello all, I absolutely love the way the factory twin pipes look on these Rockets, and have noticed alot of the aftermarket header / exhaust systems don't look nearly as (mad max) looking as factory imo. I don't however prefer the factory style log manifold going into them. Restriction, are...
  7. Huffa

    Little help with outlaw pipes please

    Hi all I've just installed a set of Dave platt outlaw exhausts and k&n filter on a 14 plate rocket roadster as I'm sure a lot of people have but I'm getting loads of black smoke which I guess is from over fueling. Got an ecu cable on the way so I was wondering if anyone can point me in the...
  8. JSHRAM

    Heat shield for Viking pipes

    I love my Viking pipes but like all custom pipes they tend to turn your your right leg into a bratwurst that's been forgotten on the barbe... even more of a problem in Las Vegas temperatures above 40C... So, I made several patterns and had a guy make brackets, cut, bend and weld them on to a...
  9. Ishrub

    For Sale Staintune triple pipes and cat delete crossover - All Stainless.

    I have available a used set of Australian made Staintune 3 pipe in Stainless with a Staintune stainless cat delete pipe for the R3 2004 - 2009 Std/Classic models. They have just been cleaned and the crossover cat delete has been soda blasted to remove the build up of brown staining you get after...
  10. scot in exile

    Pipes and Bars

    Got my pipes back from the powdercoater so fitted my pipes and new bars , I am a happy weirdo.:D
  11. scot in exile

    My pipes are coming Home

    Sent my Sidewinder pipes off to Performance Coating in Auburn WA and just received an email that they are shipped out to me:D:D:D:D:D:D I used these guys as the company in my home town sucked mongrel dogs willies, and as Rob(claviger?) used them and said they were good that was good enough for...
  12. Ishrub

    **SOLD** R3R Stainless exhaust, big bore, cat free, high flow. X pipes back

    **SOLD** Back on topic. Price drop $600 + postage I am swapping out my CES and twin cans with x pipe later this week I have a stainless (I think will check when removing) high flow cross pipe and unknown high flow short slash cut twin exhaust cans similar to, but not the same as Pratt...
  13. Geoffrey Andrew

    Best Rocket3 Pipes I've had so far

    I have been riding a Rocket3 for about 3 years and just had Paul Bryant from Viking Mufflers custom build new pipes and I have to say the workmanship and quality of build is excellent. The sound is nasty and really growls with a nice tone. Thank you so much for all the hard work and quality of...
  14. leatal

    Custom heat shields for curved pipes

    Trying to make custom heat shields for a 2" curved header pipe with a 3.5" center line radius. Figured I would go with a 2.25" curved pipe. Does that sound about right? Also does anyone know what CLR is needed to follow the outside contour of the pipe?
  15. scot in exile

    Prepping the Pipes

    Getting the pipes ready to give them a blast of paint, and yes they are on the kitchen counter and why are they on the kitchen counter? because I rule the house that is why and if my wife notices when she gets back from Los Angeles next month I will deny everything
  16. Danvitt

    Performance - diy pipes vs pro's

    I'm really wanting something like the carpenter street rod pipes, but ****, at $1600 what is so special about them? I have have half the mind to spend $500 on a okayish welder and make my own. Is there something we don't know that makes these things so pricey? Does anyone have any experience...
  17. Erik

    Rocket tor (3 pipes)

    Has anyone re-made the chrome on tor-silencers? The chrome-guy I talked to wanted to know if the silencers could be dissasembled. And by that make it easy for the fluids in the chrome process to flush out. The tricky thing is that I dont have the silencers yet, so his question is hard to answer...
  18. Ishrub

    For Sale WITHDRAWN FROM SALE - Triumph Rocket 3 Staintune Cat delete pipe for 3 pipes

    Triumph Rocket 3 Staintune Cat delete pipe for 3 pipes. Staintune is a 50+year old Aussie high quality Stainless Steel motorcycle exhaust maker and my 1978 BMW sidecar still has one fitted and going fine after all those years. This will need a buff or polish but the stainless will still come...
  19. Grumpy Ole Codger

    Dave Platt Short Custom Pipes

    Fellow Rocketeers, Have any of you bought and installed the Dave Platt Short Custom Pipes with the Cat delete crossover? Reason for asking is I'm wondering if anyone has had any problems with the fitting and alignment of the pipes and more importantly the alignment of the slash cut on LHS pipe?
  20. BillyIndiana

    Stock Pipes vs TORS

    OK so I am not one of those super editors. This little video has me taking off the stock pipes and putting on the TORS. I have a before and after segment. This also contains the Pledge Multi Purpose Cleaner. This is the video I shot it for. If anyone else is playing with Youtube and has any...
Back
Top