roadster

I have the full 2012 R3 Roadster factory exhaust system for sale. Exhaust manifold back with all heat shields and brackets.

Hello and good day to all. I am new to this forum and first have to admit to a bit of fraud. I have not yet purchased the 2016 R3 Roadster. With that said I hope you will all still accept me. I am trading in my I really mean upgrading my 2011 yamaha vstar 950 tourer to the almighty R3. I am in...

I have a nearly new set of 2013 OEM exhaust pipes from a Tourer for sale. They look almost pristine except some very minor (and I mean very minor) blemishes. These would never be pointed out by someone looking at your bike and would most likely only be noticed by the one polishing them. The...

I just bought a KTM Adventure 1190 R so sadly my R3R has to go. It's in excellent shape and ready for a new home.

Hey gang, I'm already running a Hans O tune but i'm getting a dip at 5400 RPM...i'm looking to try a new tune and see if I get the same problem...current setup is 16 Roadster with TORS and Ram Air... Anybody have a tune I can try on Tune ECU for this setup? I have access to a local dyno for...

I replaced my shocks with YSS.. the stockers have 1500 miles on them. in 2010 Triumph stiffened the spring on these rear shocks, so they might be an upgrade for on older Rocket with squishy shocks. I can attest they are stiff.. I am 200lbs and ran them on preload #1. $100+shipping. Call me at...

I just recently purchased a 2012 Roadster from a gentleman in Minn. It had less than 8k miles on it. Not sure why, because it was a really great bike and had a really great price on it. Anyway, I flew to Minn from ID and rode it home. 2K miles. Then took it on another road trip, another 2K...

Hey Gang, Ended up getting my 2016 Roadster dyno'd yesterday. Mods are Ram Air intake and Hans O tune. Bike made 131RWHP and 150RWTQ. Only issue I saw was a dip at 5600RPM...i'm assuming its the restriction of my stock exhaust causing it but I wanted to get everyone else's thoughts. I did...

I was perusing the Custom Cruisers website and noticed these on the following page: Triumph Rocket 3 III Roadster Sissybars & Racks Note all of the fitment listings are for the Roadster...is there some reason why any of these would not fit an older ('06) Standard? Is the bolt spacing on the...

Is it just the color - Black for Roadster Silver Alloy for earlier Rockets? Can a R3/ Classic be used for spares? I saw some listing state the Roadster is 87 Degrees - is this referring to mating surface where it joins drive shaft Parts No's are different: Roadster T3 FINAL DRIVE UNIT 87...

one spare rear fender for sale ... burgundy red I was going to do a chopped rear on my roadster and changed my mind so if somebody want to do a chop there is the opportunity.. no scratches no dings no light either . $300 takes it . beware the shipping will be expensive due to size I...

I am looking for the hardware for mounting the beetle bags to the 2014 roadster. I contacted corbin and true to form they are always a pita. They want 245$ for the hardware, I do not need the brackets, I already have them. Just need the bolts, spacers, washers, nuts,ect. If anyone has these or...

Anyone selling or know where I can get a Flyscreen for my 2016 roadster? Specifically like the one in the pic above that would match my paint job?

Hey Guys! Just trying to educate myself here. I recently had a set of TORS pipes installed on my bone stock 2012 R3 Roadster. When I got the bike back from the dealership, they had loaded the 20355 (I think) map on the bike. The bike ran unbelievably smooth and wonderful, but there were 2...

Is it 7/8 or 1 inch ?

I took my Roadster up through the mountains behind my place about 25miles (43Km) to Bull's Head in the Namadji National Park bordering the northern tip of Kosciuszko National Park which contains Oz's tallest mountain named you guessed it Mount Kosciuszko 2,228 metres (7,310 ft) in the Snowy...

I bought the bike with the Fairing included. I mostly do local rides so I don't need it. The fairing has some stone-chip damage (see pictures) so it will probably need repainting or a vinyl wrap. There is also a mount for a cam (maybe GoPro? Not sure). Comes with the 6" smoke screen attached...

Looking for a corbin flat black painted fairing for my roadster. Let me know if you are wanting to sell one. Thanks,

Nice day to day. I took a spin down by the Ocean in the Monterrey/ Pacific Grove CA area.

I have some parts for sale. Passenger backrest, sissy bar & luggage rack Brand new unused Eastern Beaver Ignition kit Roadster windshield with brackets Black fly screen with brackets sold 1 front fixing kit Touring seat with riders backrest Leather saddlebags with ez brackets Original...