map

Recent contents Top users
  1. RacerX74

    20145 Gracie map

    New tune loaded and running to suit Ramair/aftermarket filter and full Jardine system. Thanks to @warp9.9 ;) Planning a bit of a ride tomorrow morning to the Norfolk coast if this weather holds up . I was previously running 20227 that the old girl came with .no idea if it had modifications or is...
  2. R-III-R Turbo

    9000rpm TuneECU map

    Anyone fancy a 9000rpm / 400kph limit TuneECU Roadster/Touring map template? :D 04-09 Rocket III "Standard" / Classic / Tourer map template Also have a 9000rpm PCV Rocket map (with ignition tables too) to compliment it. Thanks to my boys Alain @ TuneECU and Chris @ Dynojet. PM me email...
  3. R3 in CT

    R3 Tune Ecu map question

    I just ran tune ecu for the first time and I found out I have map 10222. My bike is a 2009 standard R3 with cats removed and after market pipe. I also have a K&N air filter. Looking at the tune ecu site it looks like I need either the 10226 or 10228, both say they are for aftermarket pipe...

  4. Can any one help me with a map

    Hey all I've got a bit of a problem... Normally everyone is asking for a tune for more power .. But I'm relocating to France and I have a 2004 rocket.. With 2after market pipes (tours) and 1standard with a k&n air filter and I need a tune to comply with French regs which is 78.1kw would anyone...
  5. Starmanut

    A couple of TuneECU questions after first map read.

    Well, I finally hooked up the laptop to the bike. I found out that Windows 10 does NOT find the drivers. I had to install them myself manually. I followed the directions found on the site with no problems. A question: During the connection a series of clicks were coming from that little box...
  6. sleeves

    ECU Map and PVC with AT

    Hi All Had a problem this week, typically it was as I headed off on holiday this, i should have left things alone but it got me to thinking. For some reason I reset my TPS and stepper motor, checked my ECU map then accepted the trims on the PCV AT. I have the POD300 that displays AFR etc but...
  7. niktriple

    i need a custom map!

    hi guys! just joined the forum :) i recently bought a street triple r 09' with 24600km. im the second owner. the first one, replaced the stock exhaust with an italian HP Corse Hydroform. im so glad he did. great looks and even better sound! in addition, i replaced the stock filter with a K&N...
  8. Colin_m_timms

    Rocket 3 roadster 2011 map

    I am looking for a map suitable for 2011 roadster with collector box and standard exhausts removed and replaced with Dave platt link pipe and exhaust silencers.
  9. Colin_m_timms

    Hi all looking for custom map for R3

    I'm looking for a suitable map for my dads rocket 3 roadster 2011, with Dave Platt exhausts and cat replacement pipe, to use with tune ecu cable and android app. I have found 2 on there website but not sure whether they will be suitable, ( 20226map.hex and 22028map.hex ) Any help or info would...
  10. Bull

    2007 classic tourer stock map

    Does anyone have the stock ECU map? Looked but could find one.
  11. RIII Forever

    Point dynojet proposes mapping with tuneecu is good?

    Hello to everyone I am writing to you from italy (I'm using the google translator) for information about the remapping according to the changes I would like to make on my current R3 Roadster MY16: I would like to install the Carpeter sidewinder with secondary butterfly removal and ramair...
  12. Tony Casey

    Base Map

    Hi all can someone out there give me the correct base map for my 2012 rocket. Ive installed a power commander v and autoune Am getting a miss when accelerating hard full open throttle between 2500 3500 rpm then comes rite. Any idears on the problem much appreciated. I sort of looking at a coil...

  13. Map file needed

    Guys has any kind soul got a suitable map for my 05...its running Jardine type headers going into a cat free twin pipe system (free flowing) and ime on ramair filters with my secondary's still fitted. Its popping like hell on the over-run and hopefully this can be cured. I have the correct cable...
  14. rcket3

    Australian newbie looking for a tuneecu map for a 2016 R3T

    Hi hoping that someone can advise on a suitable map for use with tuneecu for a 2016 Rocket 3 Touring. Just about to be fitted with TORS pipes by a dealer and will have the dealer TORS flash. No other engine mods. Have ordered a cable from Triumph twin in the UK. Does anyone have any idea if it...

  15. Newbie looking for map please

    Hi guys Just over a week since I got my Rocket. Loving life apart from the handling ,but that will have to wait for now. Had a good blast yesterday , on the way back not only battling with the handling in the rain but the dreaded high tickover kicked in just to make...
  16. Kim Douyard

    read original map

    I hook up and seem to be connected to ecu but drop down doesn't let me click on read map, this has probably been gone over here but i searched a little with no luck
  17. AlanW

    Tune ecu map

    Hi I'm new to the rocket scene just looking for a map to go with my 2008 classic its had a decat and o2 removed keeping the tors for now may change latter but I need the best map to use with the tune ecu lead etc or the latest whichever you guys think is the best Thanks Alan
  18. Tony Casey

    Map Required.

    Hi all my name is Tony from the Gold Coast Queensland Australia, i am looking for a map for my 2012 r3 roadster. My problem is the map i have is too rich at the lower end the plugs are fowling up and i am replacing them regually. Modiifications are 3 into 1 shortened exhaust with the cat...

  19. Carpenter sidewinder map

    Hi guys, im looking for a map for my friend who has a 2014 rocket roadster with ram air intake (possibly changing to triple k&n's) and he has just ordered a carpenter sidewinder system. We are trying to avoid using a power commander so hoping for maybe a tuneecu map if theres one available or...
  20. leatal

    IAT and MAP extension harness

    Anyone know where I can get an extension harness with male/female plugs for the IAT and the MAP sensors so I can simply plug into existing harness and sensors (which will be moved to into ram intake)? I know I can simply cut and splice the harness, but I prefer to leave the bike stock so I can...
Back
Top