Thanks to my boy Chris at Dynojet for making this available for us;
http://www.powercommander.com/downloads/Support-Released/Software/dynojet_power_core_setup_v1.11.4.24032.exe
E.g. To create a PCV map with up to 50 "Ultra Fine %TP" columns;
Download and install the Dynojet Power Core...
Hi guys , this got me worried , the bike has been laid up for a week on a tender with new battery , started it up and while ticking over bike stopped with instrument lights out , turned off then on again and started up and all went out again but clicking noise was coming from the triumph s4...
As far as airbox pressure at under 100 mph speed its nice to imagine it. Other forums I'm on proved it a fallacy long ago. Cool air is worth HP though as many know. My question is there a person who has dyno'd their r3 stock, and with the ram air for a comparison? I searched and didn't find this...
Hey Guys,
Figured I'd move my issue out of the introduction section and hopefully get some more feedback. I picked up the bike not running with really no information on its condition. I figured from the condition it was left in that it has a no spark issue.
I reassembled the bike from the...
Have had intermittent loss of power but always returned before a resolution was foun
While riding on rough dirt I had a complete loss of power.
Stopped lifted tank wriggled some wires and keyless start module power returned.
Lowered tank power disappeared.
Raised tank disconnected keyless...
Following a few requests from fellow captains recently – not so much of an unofficial “how to”, as it is just a documentation of “how I did it” (took me a solid week the first time)
This is in NO WAY a substitute for the expert guidance of Bob Carpenter & his boys.
You need to be at least very...
The bike currently has stock pipes with a decant pipe and that's pretty much it.
Using tuneecu I used a map that opens the secondaries and it feels more responsive but not by enough.
I'm thinking of a ramair setup and aftermarket pipes when funds allow but eventually I want to supercharge or...
Either of Carpenter racing's full exhaust
ram air's intake system (single foam filter)
Tuning???
I like the original Carpenters header, and exhaust, however; the equal length header / sidewinder looks good too. I'd really like to do the triple K&N's, but don't want to modify or delete the claw...
The below image is a compiled graph of a few different bikes and my recent R3 dyno.
Kind of puts it in perspective.. eh? I had to extend the graph just to fit the curves luls.
I have 2015 roadster. Purchased it few months ago with a seg of short exhausts. No idea what kind, i know nothing about tunes etc.
Getting to the point: I recently noticed that around 3.700 rpm on 3rd 4th and 5th gear I hit power plateau. Engine revs but i lose the pull if you know what im...
Two months ago I installed a new PCV and AT onto my 2017 roadster to perfect my already fantastic map.
I have run enough miles now for it to have done its work and I'm taking it off now as it is no longer needed.
The cheapest I found this on line was at $521USD from Motomummy..200 dollars less...
Guys.
Take a look at this dyno run graph posted on the social media by a local turner .
Power commander and setup on a 2010 Rocket lll .
Has it lost to much torque and at the bottom for the sake of more up top
Right to the point 2005 rocket 22,000 miles. Started to get a occasional high idle but would go away after a minute then started rarely getting a backfire when i would be lugging it down a bit then get on the throttle. Problem got worse so took it to a Triumph dealer. Just to point this out...
Hi Guys
I have a Rowe Electronics PDM60 that is virtually new. I bought it around 3 weeks ago and installed it on my R3T. I even did a post about the install I did, but have yet to do a updated post as I made some changes to my mount. There is nothing wrong with this PDM60 and everything...
My new to me 2008 Moto Guzzi Breva 1200 Sport has a Mistral exhaust and a cat eliminator pipe. Runs well and sounds really good. Today digging thru the wiring I found a Power Commander V and the accompanying PC Auto Tuner.
How do you use and tune these things ?
Hello, come from Québec. Rocket 3 are very rarely in my area. No shop for dyno run. Thank you all, to be there for me. My roadster modification are tors, k&n oem replacement filter, and triumph dealer tune for tors. in future i will buy by pass and ramair but not this year. i just bought pc5 and...