brake

Hello Rocketeers, Getting close to time to change brake pads on The Beast. What's the best pad material? Should I go with sintered or semi-sintered? I have 5500 miles on my bike, does it digest pads the fast? Any particular brand that's better than the rest? Galfer, EBC, etc. Thanks,

Hi Guys, I want to change out the brake fluid on my 2015 R3T over the winter. When I had my Valkyrie, I added Speedbleeders to the front and rear brakes and they made the job very easy. I would like to put them on my Rocket. My question is, would the procedure be any different seeing as how my...

I have some Chromeline foot peg and brake lever Xmas bling for your Roadster or even your R3 Standard. Triumph factory items identical in every way except rubber insert to the factory Roadster foot pegs with 'feelers' but with extra bling!;):D The stock Roadster ones are polished alloy these...

Brake Pedal from a 2005. Excellent Condition. Rubber is good too. $50 Shipped Domestically.

Hello Rocketeers, I am writing this from my bed in the hospital with a broken bone, damaged nerve , six surgical nails holding my arm together and all I could think if is how to fix the issue with the bike and when I can ride again :) See, I had a very strange problem: my front right caliper...

Hey my R3 brothers, How hard or easy is it to change my own front and rear brake pads on 2012 Roadster? Thanks in advance.

good evening all, still in LOVE with my 07 :) but I noticed I have no light activation with I apply my rear brake. pretty sure it's the pressure switch, and I"m wondering if there is an 'aftermarket' part that people are using, or is this pretty much a dealer only expensive part?? for right...

Has anyone tried Ferodo Sintergrip HH pads?

This may a "no $hit" fix or repeat post but here goes: Issue: Front brakes on 2005 R3 are barely working. Lever pulls in almost to the grip. 1st thing tried = replace brake fluid and bleed - helped a bit but not much 2nd thing = replace both sets of pads - helped a bit but not much After 2+...

I have revco risers along with the Allan Phillips t-bars the line is too tight and can’t be bolted where it belongs next to the neck anyone know where I can get a 3”-4” over stock line I have a 09 classic model

Just fitted rivco miniboards now needing a brake pedal to suit or similar if anyone has 1 lying round for sale I'd be happy chappy

My front brake pad pin bolts need to be replaced with Ti or SS. Someone, in the name of safety, torqued them excessively. It was not me! One will not come out and is almost stripped. :banghead: I'll see if the shop can take it out without removing the whole caliper. It's been posted but...

Harrison Billet race brake discs and calipers. 6-piston calipers, show polished Single: GBP 312.40 Pair: GBP 624.80 6-piston calipers, clear or black anodised Single: GBP 336.60 Pair: GBP 672.10 LEFT side, RIGHT side, Model, Type & Finish, 121257P, 121256P, T509 - ROCKET III, mini 6...

Having problems with bleeding the Front brakes on my 2007 R3, no matter what they are still spongy. Anyone had the same problem, if so how did ya fix it? Also will a R3 Touring rear disc fit on a Standard R3 rear wheel. All help appreciated, cheers

Hey gang, Quick question for the team. How does one remove the rear brake light lens on a 11 R3T? Do I have to unbolt the whole assembly from under the fender or does the lens pop off? The lens doesn't seem to have any play so I am guessing I have to unbolt it. Thank you, Paul.

I have just purchased a HBF8138 2 front 1 rear brake hose kit from Hel. The 2 front have been fitted without any problems. However the rear hose,if it just replaces the stock hose then it's about 4 inches too long.Looking at the length of the hose it will bolt directly to the master cylinder...

Hello guys, I was just bussy pushing back the brake pistons on the aft caliper. And when pushing them inside I pushed strait true the insert cup (see attached picture) I checked the workshop manual to find this part, and also checked several website's but nowhere I can find this cup/cover...

Need help because I do not know electrical. My ignition finally crapped out on my 2009 Classic so I went with a keyless bypass. (Digital Guard Dog) Worked fine for a week then died. A friend and I traced it to a bad connector in the new kit and at the advice of DGD we cut the connector out and...

Hi all anyone got any ideas on getting the pistons out of my front brake assembly? i don't have access to compressed air to push em out. thought about soaking with inox overnight to get them out. also does anyone have the triumph code for the front brake seal kit? cheers

Fellow Captains, I've recently replaced my front brake pads, using the EBC HH pads. Part#FA236HH. Rears are FA209/2HH. I watched videos and read instructions, and most of them had the calipers off the bike. I did the work without removing the caliper, and wanted to check my work with you...