1. Chip

    Brake light flasher

    i have been looking at the different light kits that have the tail light flash when you hit the brakes. For the last three (3) years I have been seeing these at dealerships, rallies and swap meets. The price starts at around $175.00 and goes up to $325.00. Just not willing to dig through the...
  2. tman

    Extending brake line

    Any suggestions on how to extend brake line for higher bars? Does the top line on the ABS junction block remove on the forward side so that the segment of brake line from junction to control can be replaced? If not, how do you extend line?
  3. Landstar

    New brake light modulator

    I will have one of these real soon.
  4. Paul Bryant

    Rear Brake Line.

    Last week I went for a blast up the Valley and back for a little bit of stress relief, great ride, no problems. I got home parked the bike just outside the house and went off and did other stuff. Came back about an hour later to put the Bike away, just rolled down the hill to the workshop...
  5. barbagris

    Sneaky Flashing Brake Lights

    In case anybody is interested. Used one of the universal timers from timers-shop. Program mode 18. Flashes manually input. Flash 1:2:3:5:7 then off. releasing brake stops flashing and then will start anew if brake reapplied. YOUTUBE LINK REMOVED - TOSSERS The indicators have a 10W orange LED...
  6. Rocket Belly

    Advice on brake pads.

    Post ride inspection showed I will be needing to replace the brake pads on the R3. I am looking for quality not cheap knockoffs. What's the groups input?
  7. Trumpeteer

    Changing Brake Fluid on ABS

    I recently did a brake fluid change on my front and rears but then realized there is an extra step needed for ABS (this is my first bike of having ABS brakes). I did a Google search and read that Triumph requires to have some kind of computer program in order to flush out the ABS housing. Does...
  8. Bigj1955

    Longer Brake pedal??

    I installed the FC-17 forward controils on my '16 roadster -mtheywork great - the only thing is that the stock pedal from the roadster is way too short and I can't use the whole surface of the mini board to rest my foot - Any ideas on how/where to get a longer pedal??
  9. Jabo75

    Galfer brake pads

    Anyone had experience with Galfer semi metallic pads? I really want to get the EBC sintered pads, but the Galfers are the only ones in stock and I want to change them this weekend.
  10. Mike Enfinger

    LED Auxiliary Brake Light

    I want to install this LED brake light on my 2015 R3T. Can I just connect to my stock brake light wire? On the stock wiring, which is the brake light wire? Red or blue?
  11. Bladerunner13

    Rear Brake Assembly

    Hey, I'm about to take the rear caliper off so I can pull the pistons and polish them in the hopes of stopping the one that is sticking on me. Question is, according to the manual I need to lift and support the rear of the bike. How necessary is that part? Can I do it without lifting the bike...
  12. sonny

    front brake reservoir.

    Took the reservoir cap off the front brake when i flushed the brake system and reinstalled it but noticed it was leaking. May have over torque it. Bought a new seal and problem solved. This time used the torque wrench instead of my mechanical IQ. Have enough brains to buy a good torque wrench...
  13. Lickety Split

    Brake pads

    Replaced my brake pads. 9000 mile mark. Ceramic pads from Amazon. Don't think I like them. Stopping distance. Just not getting that firm short stop feel to it. Try something else i guess.
  14. ThisGuy

    How Much Brake Fluid For A Flush?

    Roughly what is the total brake fluid capacity, or how much should I have on hand for a complete flush?
  15. Front Fender Brake Pipe Clamps

    Hi All. Anyone know where I can get front fender break pipe clamps from now? Saw good quality after market metal ones some time ago on eBay (chrome or black) but now they don't seem to come up on any listings.
  16. ZoneIII

    Oh no! Another brake pad thread!

    I did read one other thread about brake pads but it wasn't specifically about what I'm interested in. First, does anyone know what composite is used for the stock R3T ABS brake pads? Second, I see there are a lot of positive comments about EBC HH pads here. However, when searching for info...
  17. AndrewK

    Front brake level - normal?

    Hello all, I have 200 miles on my R3T now and I have a quick question about the front brake level. When the bike is off it looks like the fluid levels are full, but once I get going the levels drop to the 'lower' indicator. Is this a Triumph thing, a dual calipers on the front thing, or nothing...
  18. BigNorm

    Effing brake line

    I'm having trouble getting this line to break loose. ( the top one ) Did they use lock tight on It? I don't want to strip it.
  19. RichRIII

    Lost Rear Brake on R3T

    on my 2014 R3T ABS, I lost all rear break pressure today on a longer ride. It just pushes to the floor. Fluid level ok. No leaks. Since it is under warranty, I will let the dealer mess with it. I do not think it is air in the line.
  20. 420ponies

    blowing fuse for rear brake light?

    The only thing I have changed are the headlights to LED's , and rear tail light and rear license plate to shorten up turn signals. I ride, Hi beam indicator comes on then goes out, get to destination, no tail light, no plate light. I have brake light(GOOD) just no tail light or plate light...
Back
Top