brake

Recent contents Top users
  1. ve1rfb

    rear brake light switch

    good evening all, still in LOVE with my 07 :) but I noticed I have no light activation with I apply my rear brake. pretty sure it's the pressure switch, and I"m wondering if there is an 'aftermarket' part that people are using, or is this pretty much a dealer only expensive part?? for right...
  2. Triple Trouble

    Ferodo HH brake pads

    Has anyone tried Ferodo Sintergrip HH pads?

  3. Soggy , sloppy, barely working Front Brake fix

    This may a "no $hit" fix or repeat post but here goes: Issue: Front brakes on 2005 R3 are barely working. Lever pulls in almost to the grip. 1st thing tried = replace brake fluid and bleed - helped a bit but not much 2nd thing = replace both sets of pads - helped a bit but not much After 2+...
  4. SoUrPuSs

    Extended front brake line

    I have revco risers along with the Allan Phillips t-bars the line is too tight and can’t be bolted where it belongs next to the neck anyone know where I can get a 3”-4” over stock line I have a 09 classic model
  5. bebsy

    Rivco brake pedal or similar

    Just fitted rivco miniboards now needing a brake pedal to suit or similar if anyone has 1 lying round for sale I'd be happy chappy
  6. 1K9

    Front Brake Pad Pinch Bolt

    My front brake pad pin bolts need to be replaced with Ti or SS. Someone, in the name of safety, torqued them excessively. It was not me! One will not come out and is almost stripped. :banghead: I'll see if the shop can take it out without removing the whole caliper. It's been posted but...
  7. Ishrub

    Harrison Billet Brake calipers and discs - Iron vs stainless and other options

    Harrison Billet race brake discs and calipers. 6-piston calipers, show polished Single: GBP 312.40 Pair: GBP 624.80 6-piston calipers, clear or black anodised Single: GBP 336.60 Pair: GBP 672.10 LEFT side, RIGHT side, Model, Type & Finish, 121257P, 121256P, T509 - ROCKET III, mini 6...
  8. bopa54

    Brake Problems on 07 R3

    Having problems with bleeding the Front brakes on my 2007 R3, no matter what they are still spongy. Anyone had the same problem, if so how did ya fix it? Also will a R3 Touring rear disc fit on a Standard R3 rear wheel. All help appreciated, cheers
  9. Hemi_Guy

    Rear Brake Lens Removal

    Hey gang, Quick question for the team. How does one remove the rear brake light lens on a 11 R3T? Do I have to unbolt the whole assembly from under the fender or does the lens pop off? The lens doesn't seem to have any play so I am guessing I have to unbolt it. Thank you, Paul.
  10. ant

    Fitting Hel brake hoses

    I have just purchased a HBF8138 2 front 1 rear brake hose kit from Hel. The 2 front have been fitted without any problems. However the rear hose,if it just replaces the stock hose then it's about 4 inches too long.Looking at the length of the hose it will bolt directly to the master cylinder...

  11. Brake Piston insert

    Hello guys, I was just bussy pushing back the brake pistons on the aft caliper. And when pushing them inside I pushed strait true the insert cup (see attached picture) I checked the workshop manual to find this part, and also checked several website's but nowhere I can find this cup/cover...
  12. TRath

    Help: Signals, horn, brake gone

    Need help because I do not know electrical. My ignition finally crapped out on my 2009 Classic so I went with a keyless bypass. (Digital Guard Dog) Worked fine for a week then died. A friend and I traced it to a bad connector in the new kit and at the advice of DGD we cut the connector out and...
  13. kenne

    brake piston removal

    Hi all anyone got any ideas on getting the pistons out of my front brake assembly? i don't have access to compressed air to push em out. thought about soaking with inox overnight to get them out. also does anyone have the triumph code for the front brake seal kit? cheers
  14. Mhboldt

    Front and Rear Brake Pad Replacement Service

    Fellow Captains, I've recently replaced my front brake pads, using the EBC HH pads. Part#FA236HH. Rears are FA209/2HH. I watched videos and read instructions, and most of them had the calipers off the bike. I did the work without removing the caliper, and wanted to check my work with you...
  15. BeastMaster

    Front rotor question?

    Hey guys I have a 2012 R3R, and I'm getting some vibration from my front brakes. It doesn't happen at curtain speeds only form about 50-70 MPH. While inspecting my rotors it seem like they are floating rotors. e.g. the disc are loose on the rivets slightly. Does the roadster come with floating...
  16. Ragnar

    Front brake pulsing after changing pads / tires

    Hi My front brakes did not give any bite they were applied, but all was nice an smooth. Bought some new pad and new tires (Avon Cobra Crhome) and got the shop to change both. The guy at the shop told me that the rotors had been quite blue on spots but he had tried to clean them up. Well pads...
  17. Skelton Hogs

    Brake lights

    Fair gents Re r3T standard rear brake light... Can someone recommend a brighter alternate replacement bulb? I've only been able to find same. 100 thank yous
  18. HIM57

    No rear light or brake - headligh dim when braking

    Once again - I have am electrical issue. Sometime ago - I did fit a LED rear / inicator light and relay which worked . At the weelend I added the Ram air filter. Took her out for a spin and seemed well in the world. Until I noticed no rear light either running or braking - no number plate...
  19. Paul Bryant

    Four pot rear brake kit.

    I've built this four pot Caliper kit for the rear of my Rocket. I've used a front left Rocket caliper with my own design mounting bracket which under slings the caliper for a more tidy look and to expose more of the rear wheel. I'm looking at making more of these kits so am looking to see what...
  20. Mark Sutterby-Watts

    Front brake top hose

    Hi. Wanted to fit a new pair of handlebars on our 3 today but they were a tad longer and means that the top front brake hose isn't long enough. What's the deal with the hose join where it splits into 2? The top hose has a banjo at the top, is it a simple screw thread where it joins up on the...
Back
Top