rocket

Good day all. Just (well 3 months ago) picked up an 06 Rocket iii, with only 10,000 miles. She now resides to my 07 Triumph America, that has been highly modded, that has taken me all over the western US, and turned into a keeper for life. Much like I expect my new addition to be as well. Still...

I have a Rocket 111 2006 model. It appears there is oil leaking from the rubber drain on the bottom of the starter motor. Can someone please tell me how to fix this as I cannot find anything about an internal seal only the outer O ring. O not sure how oil actually gets inside Thanks

Hello , i currently own a 06 rocket 3 classic and im having an issue that i cant figure out what the problem is.. when i take off in first gear and i get to around 3000 rpms the bike feels like its slipping when i shift to second its good until 3000 rpms and does the same but after second gear...

Hello guys, fresh stock Roadster owner here. It is time to plan some modification :)

Got a good deal on 2020 model

This information is not new. Many captains are already fully aware, but may still overlook this common cause of either obviously poor running, or a slight “seems like something’s not right” feeling. I often put off checking this when something seems amiss, as it almost seems too obvious, too...

Albing here. Long known about the Triumph Triple but was a diehard Bonneville fan. Started riding 53 years ago on a Honda 305 Scrambler. Dreamed of that Bonnie. Finally got one. And over the years, lots of beautiful cycles of assorted vintage and origins have enjoyed my warm garage. Started...

Anyone have a Trikstore.com large style knee pad for sale or can send me an outline of the pad? I am working to make a decent knee pad that shows the motor size in cubic inches.

Hi all... thinking about changing handle bar in my 3 R. Not exactly due to posture but regarding arm to much extended ( I´m 5`8" or 1,70 m) specially in low speed turning to the right, too difficult to handle friction zone on the clutch with the arm fully extended... does it make sense or common...

Hi all. I´m considering adding a shift assist on my rocket 3 R. I´ve been using shift assist on my Street Triple. On that bike it was only upshift and as far as I can remember it only works from 4000 RPM and higher. How does the Rocket 3 works regarding RPM´s ? Is there any particular diference...

Hello, I have a 2018 Rocket 3 Roadster with Ram Air Filter Kit and Paul Viking Exhaust with the custom headers and Twin Muffler System (3 into 2). After the I installed these mods, the headers were running so hot my pants caught fire. Luckily Paul and his friend provided me with the Charles...

Hi All, I am working on as much weight reduction as possible for my 05 Rocket. I have it torn down and I need some input. I currently have a Jardine exhaust that I plan on keeping. Also I have a set of BST Carbon wheels, Carbon Dry tail and front fender, and Ramair. I am looking at replacing the...

So attempting another post on this, with better thought out detail. My 05 standard finally was fixed to perfect, and i thought it 2 be no biggy to open up the MPH speedo to tighten up, as it was loose. DID disconnect battery+ before tinkering. did spray light amount of simple green to clean out...

I see that DynoJet has a tuner for the 2020 Rocket 3, for $350. It is totally seperate from the ECM. Has anyone looked into it? On a side note, I got the DNT tune and after all the hype I was expecting a big noticrable diferrence. I do see the ref limit is now above 7k but other than that??? Im...

Hi all. I´m considering adding a shift assist on my rocket 3 R. I´ve been using shift assist on my Street Triple. On that bike it was only upshift and as far as I can remember it only works from 4000 RPM and higher. How does the Rocket 3 works regarding RPM´s ? Is there any particular diference...

So after i thought i fried my enttire speedometer gauge cluster. turns out the road speed sensor actually went bad. replaced ans speedo is readding perfectly, along with odometer readings.. my major concern is if my check engine indicator/ low oil/ temp indicator are working properly? dont wanna...

Hey guys. I'm new to the forum and fairly new to rockets. I've had a relatively stock 06 classic for about 6 months. It has exhaust, k&n drop in filter and reflash. I just purchased a 09 touring with the Carpenter 140 kit. The initial impression is a bit lack luster. I did a side by side...

I've owned a rocket for about 6 months and just bought another!

I just got my Rocket 3 Triple Black in April. I'm worried about using my two arm floor jack I use on my HD. I asked the service manager at my dealer, and he said I was fine using it, but he's been wrong before. It looks like I'm lifting from the motor, and I'm afraid to do it. I'm not trying to...