ignition

Recent contents Top users
  1. Drmatt357

    Ignition Table modification for 2016 Rocket

    I have just purchased a PCV and will install my Viking exhaust and Ram Air unit. I believe modifications would be needed to the iginition as well as the fuel curve. Although I've haven't heard anyone mention ignition adjustments for the Rocket. My question is, if spark curves need to be...
  2. Ishrub

    Anyone used this? Dynojet Power Commander V Ignition Module #6-103 Triumph Rocket III

    Having a PCV and AT200 already with a @HansO tune, I presume this could only be of use when using a dyno and somebody who knows a little more about tuning than just fueling. Is there any point to using one without engine modifications? Dynojet Power Commander V Ignition Module #6-103 Triumph...
  3. Steve Barnes

    ignition switch replacement

    I need to install my new ignition switch. I need advise on how to preform this surgery before pulling everything apart. I installed the EB kit without a problem but when looking around, it seems there must be a trick or two involved with getting the old one out and new one in. Locating the...
  4. Brian Bracken

    keyless ignition

    any one know where i can get a Decrosse keyless ignition plug and play kit
  5. albertaduke

    for those changing ignition barrel

    just a quick reminder if any one for any reason orders a new ignition barrel .. beside the criminal amount of money required for this little part DO NOT THROW AWAY THE OLD KEY ,, because in it wisdom triumph made the side lock for the seat non generic the new key WILL NOT pop the seat off...
  6. Steve Barnes

    Possible Ignition Issue

    I have a 2005 beauty. She is beginning to have an electrical issue. This weekend, I fired her up and all was well but died within two to three seconds where everyting was dead, no lights nothing. I turned the key off then back on and nothing, No lights no sweep. I turned the key off and I...
  7. TriumphR3Newb

    Keyless ignition

    Has anybody installed a keyless ignition on their Rocket? My bike has this nice batwing fairing but it makes access to the ignition a little tricky and tight. I was thinking about a keyless system like Digital Guard Dawg. Anybody installed something like this and have issues or was everything good?
  8. sleeves

    Tune ECU Ignition Table Question

    HI looking for an answer here. And hope question is clear. I have always thought that the "I" tables in the ECU mapping were for each cylinder (like the F-L tables). Now I am not so sure as I looked at some Thruxton, Thunderbird and TB Storm maps. They all have 2 cylinders and, as expected...

  9. just fitted a Decosse's Keyless Ignition

    A big thanks to Decosse's (Ken) got his Keyless Ignition kit and it was a breeze to fit only takes 15 minutes,Thanks
  10. HansO

    Fitting a Decosse's Keyless Ignition

    I had an Awesome day today went on the first decent ride I have had in a while (been either to busy working or the weather has been up to crap), all my recent rides have only been short ones to neighboring towns to have a coffee or a catch up with mates. Well today I had the pleasure of...
  11. Theburnking

    Keyless ignition

    just fitted my keyless ignition from DEcosse (ken) brilliant bit of kit well impressed no more struggling behind my fly screen for the ignition now , pull the clutch lever hit starter button thats it done, jump off hit the kill switch walk away
  12. MajorTom

    Roadster didn't start & check engine light

    Not sure if anyone has heard of this problem based on these "hints" (I'm not mechanically inclined): 2012 Rocket Roaster with Carpenter Brute exhaust, Power Commander, air box delete, triple K&N filters, 37,000km I put in about 600km since I got her this winter. Has been running like a charm...
  13. JSHRAM

    Ignition switch relocate A la Mittzy

    Took Mittzy up on his offer to make a switch extender harness for me so I could relocate mine to the lower left plastic panel (in front of the left side cover) like he did. I have to say that I really didn't like the stock location of that switch and Mittzy having already perfected the harness...
  14. albertaduke

    roadster ignition wiring extention

    has any body either purchased or done a roadster ignition barrel extension sometime ago Rivco sold such an animal but they don't anymore and I believe the barrel on 06 is different than say 2013 roadster if some captains have figured out a system to start and stop without fishing for the...
  15. unforgiven

    needing Rlll stock ignition timing

    high there. Who can inform me about the Rlll stock ignition timing. How many degrees advance for example. Thanks !

  16. Ignition Replaced Now Bad Miss

    Thursday I had the ignition switch replaced on my 2011 R3T. The ride home from the shop the bike was missing so badly I wasn't sure I'd make it but I did. Friday did the 12 minute tune and engine light finally went out and bike purring again. Today rode for about an hour and running well but...
  17. barbagris

    IGNITION - POWER CONSUMPTION

    Ok - This is a genuine question. If not then I'll have to try and find a way to measure it. Has anybody measured how many Amps or watts their 3 coils are drawing from the electrical circuit? It might seem a redundant question - but you don't get the sparks for free. There used to be an...
  18. Joesmoe

    Tech data for ignition switch and alarm ?

    2014 R3T - sorry if this has been covered... Which are the connectors for the ignition switch and alarm, respectively, please ? I have the service manual, and going to install DeCosse' keyless ignition, and the instructions couldn't be simpler, to wit: 1) Identify and disconnect the alarm...
  19. vanguard138

    Decosse's keyless ignition

    Well, with a lot of assistance from Ken I am up and running with my keyless ignition. AWESOME. Love it, and Ken's customer service is out of this world!!! Way cool being able to walk up to the bike, flip the kill switch, pull in the clutch, and hit the starter. Of course, unlike someone...
  20. Mark Dunn

    Ignition Timing Question

    Hi all, I have a 2009 RIII standard with stock exhaust and airfilter. I'm running the Wayne Tripp Tune for TORS and underseat K&N as Wayne told me that it would work fine in a standard set up, - which it does, although likely marginally rich in places. I will be fitting D&D slip-ons shortly so...
Back
Top