I have an instrument cluster for a 2011 R3 Touring. I bought it new trying to remedy a fuel gage that wasn't working. It seems the cluster wasn't the issue, and due to a test ride, the odometer now has 5 miles on it. I also have the stock exhaust and rear shocks for sale.
I am located in the...
Hi there R3 guru's!
I'm running Ramair and a Paul Bryant muffler with the stock headers.
After a weekend in the hilly twisties outside Melbourne, I've notice a slight discolouring of the inlet side of the muffler, which Paul has confirmed is unusual, so I'm thinking a bit too hot due to a too...
today i rearranged some parts in the shed and for a lark took the oem exhaust rom the box and weighted them :eek: 8.9 kgs EACH ... that's 20 lbs hanging each side of the rocket no wonder it gets turfed for better pipes.
My 2010 Roadster was dynotuned today.
The system has a stock motor with a Ramair intake, Viking headers and a SuperTrapp muffler. I was running a TuneECU tune. The bike was running rich before the dynotune.
The bike picked up about 10hp and about 10ft/lbs of torque.
The most important...
So, I installed my Viking header, among other things, today. Unfortunately, each exhaust port has a leak.
I used new gaskets and a small amount of sealant in each port.
Has anyone used 2 gaskets per exhaust port? Results?
Or should I just go ahead and put a thicker ring of sealant. I did...
**SOLD**
Back on topic. Price drop $600 + postage
I am swapping out my CES and twin cans with x pipe later this week
I have a stainless (I think will check when removing) high flow cross pipe and unknown high flow short slash cut twin exhaust cans similar to, but not the same as Pratt...
I have a 2017 Roadster with the AirRam filter and the Dain Triple D Racing exhaust pipe. Everything else is stock. What tune do you recommend for it?
The only reasonable tune I saw on the TuneECU page was one for aftermarket exhaust. I sent Hanso a message a while ago, but haven't heard back.
I have a 05 R3 with the 3 pipe exhaust. I would like to go to the newer 2 pipe stock exhaust. Are they interchangeable? Also what year did the 2 pipe exhaust start? Thanks
Dave Platt short custom exhaust
Very good used condition with only minor signs of use
all parts it came with included
This is for earlier 3 pipe bikes not Roadsters
£525 posted to mainland UK address
Happy to post anywhere else at your cost but it will have to be insured
Great...
I am trying to familiarize myself with the whole mapping thing and i am going to pull the seat and things off to see what, if anything the previous owner has done to the airbox and intake. I am guessing nothing has been modified.
I will eventually be able to get some mods done, but with just...
Tried posting this earlier today, hey did you guys know there’s a difference between a conversation and a thread?
Everybody say hi to the rookie!
Obviously there’s plenty of 3 - 1 - 3 exhaust systems out there. I’d love to have those three pipes run straight back on one side.
Have you seen a...
Hey Guys,
The weather is getting warmer and I need a little hint before riding season. Some of you guys know that I put on the DP exhaust with Cat Delete crossover. Also I have installed the RamAir kit and a Hanso tune. The bike runs some stronger but the A/F is way off and running rich. Didn't...
Hi guru's
I'm hoping someone can shed some light for me...
Having recently purchased a 2006 classic, one of the issues I'm trying to solve is the pillion passenger getting gassed...my wife complained on the test ride that she kept breathing in exhaust fumes.
So I whipped off the panniers and...
I have finally got around to installing the Dave Platt Deep Tone cat free exhaust and his performance high flow cross pipe. Happy with the looks and sound. Looks like a well put together exhaust, although if I'm going to be critical it's not quite the same black.
Just running a 12 minute tune...
I have an 09 classic that I was going to fit the TORS from a Roadster to....the stumbling block was the cost of a decat link pipe.
Then I got to thinking........could I fit just the right side TORS with a simple link pipe from the headers?
I have no experience with this sort of thing, would it...
Finally - for those asking to hear this system.
RevsRocket3-3 by RevRoss posted Dec 6, 2017 at 2:42 PM
All I know about its provenance is what evanr passed onto me when I bought them - "It is a one-off made by Sam of Predator fame and comprises 1.75" pipes black ceramic coated and internally...