switch

I have been having intermittent starting problems with my big girl and have got this down to the clutch switch. New one now on order. In the mean time I have been at times frustrated and tried twisting pushing and poking to get the ***** to engage, during all this i have come upon and issue...

Hey Guys, I have a 2015 with ramair and an exhaust from @ozrider (and appropriate map, no dyno yet). I was starting to write Les an email when I thought maybe this conversation would be useful for others with similar questions. I am getting ready for a spring oil change and started to wonder...

I would like to know if there are differences between these two set. Both mention that works on Classic and Roadster.

Hi guys. Got a strange one here for ya. My ignition switch is on my side cover. Obviously an aftermarket scenario. My question is about the correct position for the bike to run. From the OFF position it seems that I can run the bike with the key switched either clockwise AND counter-clockwise...

I have the EB that was sent to me with two 20amp fuses; I need to know which fuse number on the oem fuse block does the pos & neg wires go to. Thanks guys and of course "Be Safe!

Recently have been stuck in the rain more often than not. Have had some issues with water coming out of switches on both sides of handlebars along with some strange #hit. Brights to low no lights at all. Turn signal left very slow to come on. Start button hit or miss. Kind of figured it's a...

Well, my old 05, with over 60,000 miles, finally did the melt the wire off the ignition switch. Already soldered back on, now for adding a relay and upgrade wiring.

I am getting back into my Rocket after being out for several years and am looking to get my PCV-AT back into running order. For quite some time i have been running a zero map in the PCV-AT and Power-Tripp's free R3T tune in the ECU. I have read that the F-L table switch should be disabled...

Ever wonder how it works? T2502405 Fall Detection Switch 1 by R-III-R Turbo posted Apr 1, 2018 at 5:24 AM T2502405 Fall Detection Switch 2 by R-III-R Turbo posted Apr 1, 2018 at 5:27 AM T2502405 Fall Detection Switch 3 by R-III-R Turbo posted Apr 1, 2018 at 5:29 AM T2502405 Fall Detection...

I plan on replacing the regular headlight on my R3T with the 7″ XMC MOTORCYCLE LED HEADLIGHT and the auxiliary lights with the XMC LED Passing Lamp all by VisionX. I have been to the headlight revolution website and like the way these lights illuminate the road. However, looking at the Adaptive...

Believe it or not, I have to giggle the key until the headlight stays on and than it will start. Other than replacing the key switch assembly, does anyone know how to fix it. Maybe some lub down the keyway?????

Has anyone installed the EB ignition switch/headlight relay on their Touring? My son and I installed it on my 07 Classic about a year after I gave it to him with a set of very clear installation instructions authored by Mexican several years ago. It looked daunting at first but turned out to...

Has any one got a circuit of how to bypass ignition switch using relays also is there a problem with search function on this site

I'm in need of the switch assembly for the left hand side that houses the bright light switch, the auxiliary light switch, blinker indicator switch and horn button. I have replaced everything else trying to get my aux lights to work and this is the last piece left to swap out. With Christmas...

I need to install my new ignition switch. I need advise on how to preform this surgery before pulling everything apart. I installed the EB kit without a problem but when looking around, it seems there must be a trick or two involved with getting the old one out and new one in. Locating the...

Is it ok to wire the clutch switch open? It would make my wire routing easier if I eliminated it plus it would be one less thing that could go wrong.

So I will be changing the oil for the second time, about to hit 6000, thinking of switching from the Castrol 4t. I'm asking only because I'm worried about switching to the 5-40 that the dealership is now carrying, I'm not a big fan of how the clutch operates in hot summer traffic, and I'm in new...

O.K. so I'm in a real fowl mood (been dealing with the local Council all week, bunch of wimps !) I have a few things to do then I'm out on the bike for some stress relief ! So keeping my cool I do all I gotta do, go to get the bike out and the flippin (I'm being nice here !:evil:) won't flippin...

This morning I've got a broken kickstand/sidestand switch. Was fine when I last put her away, so no idea on root-cause. Bike starts fine, but only in neutral. Once started, I can lift the stand, but dies immediately when I shift gears. Seems just like the switch isn't signaling the stand is up...

Sorry, I could find any threads on this. I have Chi-com knock off LED head lamps on my 05. no problems since installed in Feb. they are so good I just leave them on Low beam. In a rainstorm the other day I was at a stop behind a truck & flipped em on Hi beam to see if that helped but all they...