1. Ted Gross

    R3T Ignition switch faulty won't start.

    Believe it or not, I have to giggle the key until the headlight stays on and than it will start. Other than replacing the key switch assembly, does anyone know how to fix it. Maybe some lub down the keyway?????
  2. Navigator

    Eastern Beaver Ignition Switch Relay

    Has anyone installed the EB ignition switch/headlight relay on their Touring? My son and I installed it on my 07 Classic about a year after I gave it to him with a set of very clear installation instructions authored by Mexican several years ago. It looked daunting at first but turned out to...
  3. Brian Bracken

    Ignition Switch

    Has any one got a circuit of how to bypass ignition switch using relays also is there a problem with search function on this site
  4. Boog

    Want to Buy Left handlebar switch assembly R3T

    I'm in need of the switch assembly for the left hand side that houses the bright light switch, the auxiliary light switch, blinker indicator switch and horn button. I have replaced everything else trying to get my aux lights to work and this is the last piece left to swap out. With Christmas...
  5. Steve Barnes

    ignition switch replacement

    I need to install my new ignition switch. I need advise on how to preform this surgery before pulling everything apart. I installed the EB kit without a problem but when looking around, it seems there must be a trick or two involved with getting the old one out and new one in. Locating the...
  6. BigNorm

    Clutch safety switch

    Is it ok to wire the clutch switch open? It would make my wire routing easier if I eliminated it plus it would be one less thing that could go wrong.
  7. imaclagan

    Oil Brands (might switch)??

    So I will be changing the oil for the second time, about to hit 6000, thinking of switching from the Castrol 4t. I'm asking only because I'm worried about switching to the 5-40 that the dealership is now carrying, I'm not a big fan of how the clutch operates in hot summer traffic, and I'm in new...
  8. Paul Bryant

    Neutral switch actuator

    O.K. so I'm in a real fowl mood (been dealing with the local Council all week, bunch of wimps !) I have a few things to do then I'm out on the bike for some stress relief ! So keeping my cool I do all I gotta do, go to get the bike out and the flippin (I'm being nice here !:evil:) won't flippin...
  9. alexwasserman

    Broken kickstand switch

    This morning I've got a broken kickstand/sidestand switch. Was fine when I last put her away, so no idea on root-cause. Bike starts fine, but only in neutral. Once started, I can lift the stand, but dies immediately when I shift gears. Seems just like the switch isn't signaling the stand is up...
  10. EasTexRIII

    DIP Switch bad?

    Sorry, I could find any threads on this. I have Chi-com knock off LED head lamps on my 05. no problems since installed in Feb. they are so good I just leave them on Low beam. In a rainstorm the other day I was at a stop behind a truck & flipped em on Hi beam to see if that helped but all they...
  11. Simonbaz

    Neutral light and side stand safety switch faults

    I have rocket 3 which I bought new in 2007.The 9 years I've owned it its been pretty much trouble free until a few months ago when out riding the neutral light started flickering and stayed on It only seems to be a problem when the bike is warmed up, it is fine from cold. After 5-10 miles it...
  12. JoseyR3Wales

    I would rather fight than switch

    Not bikes y'all. Loving my Victory Vision and perfect for my aging body and riding pleasure. This is about FRIENDS. I haven't found hardley anyone around other motorcycling "communities" that I care to ride with or share an evening around a campfire like the folks from the Rocket III family...
  13. What Causes Key Switch Failure?

    I have a 2011 R3T and it looks like I'm having a key switch failure for the second time in 6 months (first time it happened I replaced the ignition). (1) What would be the LIKELY causes for this repeated failure on a 2011 Touring? (2) Can the key switch be replaced without replacing the...
  14. Brian Bracken

    ASV clutch lever not actuating clutch switch

    have the correct clutch lever for R3 but it won't actuate clutch switch any one has similar problem
  15. JSHRAM

    Ignition switch relocate A la Mittzy

    Took Mittzy up on his offer to make a switch extender harness for me so I could relocate mine to the lower left plastic panel (in front of the left side cover) like he did. I have to say that I really didn't like the stock location of that switch and Mittzy having already perfected the harness...
  16. captain jack

    Clutch switch

    Can anyone tell me how the clutch switch is removed from the lever assembly? I am now convinced that although the switch is good, the mounting of it is loose & this is causing my starting problem.
  17. Blackthou

    Microswitch under seat.

    I had my seat off this afternoon and noticed a microswitch. It seemed to be mounted to the frame with a double sided sticky pad but had come adrift. I stuck it back on and ran some tape round it in addition to make sure it stayed in place and to avoid possible problems in the future. I didn't...
  18. UKAlumni93

    Eastern Beaver with Lo Cut Out Switch Install

    Installed the Easten Beaver relay harness today. All went smooth... Very easy to install but have encountered one issue- the gauges no longer sweep and the indicator lights do not light up during the self test. I hear the familiar clicking but nothing else. It starts with no hesitation and the...
  19. Joesmoe

    Tech data for ignition switch and alarm ?

    2014 R3T - sorry if this has been covered... Which are the connectors for the ignition switch and alarm, respectively, please ? I have the service manual, and going to install DeCosse' keyless ignition, and the instructions couldn't be simpler, to wit: 1) Identify and disconnect the alarm...
  20. Victor Chiappetta

    2013 is the ignition switch still an issue?

    Hi all pouring through the forum in anticipation of picking up my leftover 2013 and I am just wondering if the ignition switch is still something to be concerned with or have the issues been sorted out?Seems like the complaints were from older models.
Back
Top