switch

Hi, After a couple of chats with Scorpion (I guess they own Datatool now) it appears my sensor is faulty, as I find it difficult to dis-arm, and impossible to get into Service mode. I'm planning on removing the alarm, but have a question before I start annoying the neighbours.... Can somebody...

Hi all, new rocket owner here and I'm very pleased with the bike. It's definitely a revelation. I had a few questions regarding the master ignition switch (US specced bike). The dealer told me to leave the master ignition switch ON all the time, as it would drain the battery otherwise (this...

When I was ordering my bags yesterday, the service guy came out to tell me a few things on the new bike. He said many people complain about hard starting. Said leave the on off switch ON all the time. Factory told him to tell everyone this, as turning it off causes problems with breaking the...

Does your clutch switch on your touring have about 2.5mm of free play where it can be pushed in and out. Pictures below out is normal position but i can push mine in to stop which is 2.5mm. I’m wondering if my clutch switch is starting to go bad and this free play is a sign of a switch thats...

while helping out on the the diagnoses of clutch switch i have have learned a little myself. so in the future i would suggest when the checking clutch switch use a volt meter. place one black to lead to to (earth)ground (suggest neg bat post) the red lead to the terminal that has approximate 5...

Hi guys. I'm having a problem with my bike, and I think it's the ign. switch, but not sure. How do I test real quick if that's the issue? I'm working on a Motogadget M-Lock solution, but do to this Corona ****, it's hard to get a hold of one. Until then, I'd like to be able to ride. So if I...

Is there any particular reason to turn the Master Ignition Switch to "off" when not operating? I assume it might save the battery from discharging but I've installed a pigtail directly to the battery allowing me to have a trickle charger working if there will be extended periods of non-use.

Hi, I got some hitch so often it's boring, thus I thought it would be proper check inside.. so I could rule out if it's oxidized somewhere or worse everywhere.. of course it's present something whose sole purpose is hold these one down side with other on it.. I could weld wires if I should...

Just got an 05 Rocket and it starts and runs great. The problem is the lights will go off suddenly. Headlights and tail light both out. If I get under the tank and wiggle around the wires near the ignition switch which was relocated to the left panel, I can get them back on. Can the switch shut...

Hi guys I need your help with something. It's been a few years since I had the clutch cable (converted to TTS hydraulic). I'm going back to the cable with the 2.5L stroker, but I seem to be missing a small part. I reckon a plunger and spring are missing from my clutch switch. Could someone...

Bike bandit has the switch set up for $425. I think it was. Im zeroing on that Digital guard dawn key-less ignition set up. Have one on E bay for $279. Anyone have this?

good evening all, still in LOVE with my 07 :) but I noticed I have no light activation with I apply my rear brake. pretty sure it's the pressure switch, and I"m wondering if there is an 'aftermarket' part that people are using, or is this pretty much a dealer only expensive part?? for right...

My switch broke recently. I have it bypassed right now to run the bike but I don't like my fuel gauge being inoperable. I know it comes as part of the entire switch assembly do in willing to buy that. However I really don't want to spend $160 just for the switch. Anybody got one they are willing...

So today my clutch switch broke in the housing. To start my bike I have to hold the little pin in the switch to complete the circuit then start the bike. Is there a quick fix that I can do to avoid having to do manually hold the pin in? I'm planning on riding to the dragon's back tomorrow so...

I'm trying to fab an adapter to fit an actual oil pressure gauge and hate to destroy a new one experimenting. I just need the metal part that screws into the engine...doesn't matter if the plastic top is broken off. Anybody have one laying around? Thanks!

I'm starting to have issues with the clutch switch. Is there an established cleaning procedure to perform? If I replace it, since it's a $106 part (you could replace just the $6 switch component itself on my Suzuki </gripe>), is the switch portion of it compatible with any of the later models...

Has anyone installed a electronic ignition switch? I was looking at was the guard dog ignition system - kinda pricey $250. My question is it worth it? I have a 08 classic and I am on my third ignition switch - 1st 2 where covered under warranty - 3rd set me back $500 and 2 weeks in the...

Hi folks I was wondering if someone might be able to tell me how to remove the ignition switch from my 2007 R3 Classic. It looks like a lot more work than I anticipated. I took off the headlights and saw that the switch is retained by a bracket, I'm not sure how to remove the bracket. Any advice...

Hey all, 2011 R3 Touring I changed my spark plugs last night and put everything back together, it was late so I didn't bother starting the bike until this morning. Turned the key and everything lit up as normal, hit the starter and I heard a short click as though the starter wanted to engage...

I have a Decosse's keyless ignition fitted and have been having water ingress problems keeping the ignition live after rain or washing. I have tried dilectric grease and covering the holes but all to no avail. This weekend I have procured and fitted a momentary push button and fitted it to...