roadster

Recent contents Top users
  1. Martin

    Dyno results Roadster

    Here is my dyno results, blue is standard Triumph map, red is map created on dyno machine. Mods: straight through exhaust cans with cross over, standard header, k&n under seat filter. pops a little on deceleration as expected, but not too bad. Noticeable improvement in driveability ...
  2. slipperydippery

    Exhaust clip of TORS on a Roadster

    Does one exist? I found one video on youtube but it's from the front of the bike, so you can't really get the full effect. There's a great video of the older 3 pipe TORS, but I cannot find anything from the newer 2 pipe TORS for the Roadster.
  3. blip

    Roadster windshield / fairing

    so I am the proud new owner of a rocket III roadster. I used to ride a R3T but have decided to see how the other half lives :) I am interested in understanding what everyone does for wind protection. I tried ridding with the stock windshield and the clearview but actually prefer it without a...
  4. blip

    Roadster windshield / fairing

    so I am the proud new owner of a rocket III roadster. I used to ride a R3T but have decided to see how the other half lives :) I am interested in understanding what everyone does for wind protection. I tried ridding with the stock windshield and the clearview but actually prefer it without a...
  5. cadconversions

    For Sale ***SOLD***Complete Floorboard kit for Rocket Roadsters

    I have a like new (less than 200 miles on the road) kit to transform your Rocket 3 Roadster into a floorboard setup. This is the setup with the higher rails and angled floorboards that doesn't significantly reduce your lean angle. I installed the complete setup as shown in the photos and...
  6. Wrecka

    Interesting roadster

    http://marksworkshop.com.au/Pages/on%20the%20go/mws%20t%20rocket.htm
  7. Marcve

    Roadster workshop manual

    Hi all, anyone know where I can source a free soft copy of the roadster workshop manual? I want to do some minor tinkering and it helps to know the right way to lift the tank, take off and refit the back wheel, fit optima the connections, torque settings, etc Thanks
  8. steve59

    Roadster gauges

    I really like the digital display on the tach side of the roadster and was wondering if anyone here has fitted one on a standard and if it works or can be made to work. A gas gauge and clock would be nice on the long rides.
  9. Hoppa

    For Sale 2010 Rocket 3 Roadster - One Owner

    Triumph Rocket 3 Roadster - 2010 # 1 Owner # Always Garaged # Reg til Oct15 # Matt Black Colour # Triumph Saddlebags, Sissy bar and Pillion Back Rest # Triumph Touring Gel Seat with Rider Back Rest(original also supplied) # Number Plate Relocation Kit # Kuryakyn Grips with Dagger Levers #...
  10. Wannbe

    2014 Roadster Tune needed!

    Ok, 2014 Roadster, homemade tors, (big drill bit and a bit of cutting and welding) Got the cable en route. Where can I get a tors tune or is there something better for otherwise stock bike. I have tuneecu installed on my computer and have read some of the tutorials, but still feel like a monkey...

  11. Newbie Brisbane Rocket Roadster owner

    Hi guys, converted from 1000cc sports bikes, i took the plunge and purchased a 2011 roadster, burgandy and black version... Pretty happy so far, just need to get out more...
  12. Radical

    Want to Buy Bracket for Roadster Pillion

    I am looking for the bracket (like the one in the below picture) used on the pillion seat of a 2010 to present Rocket 3 Roadster. If anyone has upgraded to a custom seat or 2 up type seat and has no use for the pillion, please let me know if you are willing to sell it. Since I just want the...
  13. Mike188

    Exedra max 240/55 and roadster tank cover on ebay

    Just noticed these on ebay, if anyone is interested and want them sighted before purchase let me know as they are 10 minutes or so from me http://rover.ebay.com/rover/1/705-53470-19255-0/1?icep_ff3=2&toolid=10001&campid=5335943355&icep_item=251878659060...
  14. Martin

    R3 Roadster ECU tamper

    anyone had problems with ECU remap tamperproofing ? - is tamper set on late Roadsters ? VIN656XXX
  15. albertaduke

    For Sale triumph leather tank bib for roadster

    I do not use that black bib anymore . paid $100 sell it for $40 + shipping .the leather pouch was so hard to open I replaced it with a softer pouch other than that it is in good shape
  16. ROCKETHEAD

    For Sale 2014 R3 Roadster

    SOLD 2014 R3 Roadster SOLD 12700+ miles As it sits, $13500.00 20140601 073508 by ROCKETHEAD posted Jun 1, 2014 at 7:44 AM20140601 073444 by ROCKETHEAD posted Jun 1, 2014 at 7:44 AM20140601 073352 by ROCKETHEAD posted Jun 1, 2014 at 7:44 AM20140601 073333 by ROCKETHEAD posted Jun 1, 2014 at 7:43...
  17. cadconversions

    For Sale Rocket 3 Roadster Foot Controls

    I'm in the process of converting my 2012 R3R over to Classic Footboards. I'm taking picks and got a thread started that I'm updating once done. That said, I really don't ever plan on taking it back to the mid-controls and wanted to see if there was any interest in someone wanting / needing...
  18. Ukbiker

    Picked up my new roadster today

    Got to ride my new roadster home from the dealer today.all I can say is WOW. It's still cold here so it was only a short ride but long enough to know I'm going to love this bike.
  19. zenbiker

    Roadster Windshield

    Can someone please tell me the dimensions of the Roadster windshield?
  20. Fester

    Classic & roadster foot controls.

    Hi, it's am swapping my foot controls on my classic with a friends roadster, the roadster has ABS & a slightly different pipe set up. Bending the steel brake pipe to fit the roadster controls seems ok, but I'm having trouble with putting the classic controls on the roadster. Anyone already done it?
Back
Top