1. Eric R.

    Starter button R3T

    Hi guys. I have a quick question about my starter button on my 15 R3T. I notice occasionally that I find myself having to push kind of hard and keep pressure on the button in order to start the bike. Does this sound like a corrosion issue, or is there something in there that has maybe worn out...
  2. PaddyO

    Bike won't start after Resource ECU map installed - Solved

    I have a 2014 R3T. Did the TORS-Ram Air-Viking crossover install. Did the 12 minute tune. All with no problems. Installed a tune for this set up downloaded from the resources area. The bike will not start. After looking at different threads, I thought the tune might have gotten corrupted in the...
  3. Todd salive

    Hi does anyone out there have a good Power commanderV fuel Map for a 09 R3T with K&N , cat delete and D&D pipes

    Hi does anyone have a good fuel Map for a R3T with K@N , cat deleted and D&D pipes
  4. Griff

    Fitting front fender chrome bling R3T

    Bought this from a wrecker - off a 2008 model. Anyone advise how these are actually mounted? Particularly the plastic trim pieces? (Obviously the end at the forks is straight forward but at the front end?) TIA
  5. SignAnderson

    New Map for my R3T

    Hi everyone, I would like to change the map to my 2009 R3T. Now the bike is fitted with TORS (code A9600211/2 ) and the K&N TB-2204 air filter (underseat), I would like to ask you what is the best map available for my bike at the moment? Hoping there is someone who has my own components and has...
  6. Griff

    Corbin Seat questions on 2015 R3T

    Hey all, I bought my 2015 R3T with a Corbin seat installed. Backrests for both rider and passenger. I'm not sure whether these are the same ergonomics as the standard Triumph seat and backrest setup. I'm 6' 3" tall and I've worked out that to have the bits of my back that need to be supported...
  7. TheWhingnut

    looking into mild upgrades for 2011 R3T "Dacey"

    Since i'm out floating and have some free time right now i got to thinking about mild upgrades for my R3T. So far i have: Installed: Rivco risers Destircted tune (updated) LED headlights and aux lights TORs Bedifferent's Hand Shields Bead riders (or boog's anal Beads) Solo Seat with extra...
  8. Wayfairing Man

    R3T Fog Light Question

    All, I picked up an '08 R3T recently. The factory fog lights were disconnected at some point do to a weird battery drain/short issue. My question is: where is the harness plug and/or relay located? I saw a female two prong wire connector/lead off of the right side under the panel, a fbut I...
  9. BlackSails

    Totaled my 2014 R3T

    I have been riding since the early 70's accident free. Until a couple weeks ago. I still dont know exactly what happened but best guess, I was changing lanes left & hitting the throttle a bit. My wife said she checked the next day & there was road debris i.e. sand & dirt. I think the rear tire...
  10. Boog

    Request advice on new brake system 2014 R3T

    Hello all ye learned masters of stopping. My first questions is: What new calipers and brake lines will fit the ABS version of the R3T (2014) without needing fabrication? Second questions: What do I need to know about doing this swap at home? I get the idea that ABS is a more...
  11. ZoneIII

    Anyone know bevel box drain plug thread size, pitch, etc. for R3T

    Does anyone know the size of the bevel box drain plug - bolt size, pitch, etc. I have to repair with a Heli Coil type insert and I need to know what insedrt kit to get. I could use another size, of course, but it would be nice to use the original type magnetized drain plug. Any Triumph Parts...
  12. ZoneIII

    R3T - Stripped bevel box drain plug.

    I was changing the fluids getting ready for the new season when the darn bevel box drain plug stripped. It came out OK but would just spin and never tighten up when reinstalling it. I always torque it to spec at 15nm and it never tightened at all. The funny thing is threads didn't come out...
  13. Skelton Hogs

    Custom Wheels R3T ever seen these?

    Hi would anyone know if these wheels fit the R3T? Billet Wheels Thanks
  14. Fingers

    R3T no start

    Scenario-Started bike let it run for a few minutes shut it off and went in the house.Came out about ten minutes later to go for a ride.would not start no neutral light and miles to go is blank.Everything else seems to function normally.Gear position sensor?
  15. ZoneIII

    Anyone have A9638031 oval mirrors on their R3T?

    Does anyone have A9638031 oval mirrors on their R3T? I ask because I was thinking of getting a pair but then I saw a review on Amazon where the reviewer said the stems are too short requiring him to take his hands off the grips to see what's behind him. But he tried them on a T100 Bonneville...
  16. DaSmee

    TORS for an R3T 2011?

    I know I am going to be told that they are as rare as Unicorn Tears, but always worth asking ;-) I have found the David Platt site, and they look good, but the pipes plus the crossover is around 1k! I have been told you can drill out the baffles and that helps the sound, as well as taking out...
  17. ebg338

    09 R3T Price Opinions Please

    Hello all, As the title says I'm looking at an 09 R3T 2 tone. Appears to be in excellent condition, under 6,000 miles. Assume tires are original so will need replacement given the age. Curious about opinions on what would be a reasonable price to pay. I've reviewed NADA ($6,800 ave retail...
  18. Rocket_Rider

    AFRs on a R3T

    Anyone got experience about what AFR is likely to be preferable on an R3T with TORS and a RAMAIR I’m thinking around 13.5? I’m obviously interested in power but first importance is what’s best for engine, second power, 3rd would be fuel economy but that’s not a major consideration
  19. DodahMan

    Nice R3T for sale . . .

    Worth a
  20. dandiego

    Is it just my imagination or...? (60k mile R3T service)

    Seems like I just hit 50k miles a couple months ago, but here I am, at the 60,000 mile mark. I asked fellow Rocketeer PreStaged if he’d help me do the service and he said, “Come on over!” He really does have a great garage. We went by the book, for the most part, and knocked out the oil and...
Back
Top