Hi,
I searched through the forums but I couldn't find the answer... I have an R3 GT with Penner's Tune (USA) and it has been running just fantastic.
Now, after almost 6000 miles, I am thinking on getting an aftermarket exhaust to let the beast's voice be heard better. I read in other posts...
Just a quick question as I am headed into work and I will get on here later tonight and see if I can find it again.
I’ve seen a few unrestricted tunes for the rocket3. 2.5. But my bike is being built at carpenter and they are telling me that these unrestricted tunes are still restricted...
How does the ecm know how much fuel to add/subtract from the fuel ratio shown in the map if the O2 sensor is in open loop? If you change the ratio does the ecm adjust to the new ratio?
Morning all loaded the Penner tune yesterday on my r with no problems what a difference. Has anyone done a comparison between this tune and the DNK one on a rocket with the comp works pipes as they do ask for any mods rather than the Penner that just says standard exhaust
Hey,
So, I got custom headers and the stock tune completely turned the pipes blue and all sorts of colors, was running super lean, even my pants caught fire. Fortunately I got a map on it right now which it treating the bike, and on the 15 of August I'm getting it Dyno tuned.
That being said...
Hey,
So earlier last week I got comfortable trying out Tunes for my Rocket; one Tune actually stopped my bike from running so lean. Since then I met another Rocketer and he found a compatible Tune that requires the O2 sensor be unplugged. The instructions were to follow the cable up to the...
My 2014 R3T ABS is for the most part stock. I like the original look of the exhaust, manifold and Bearpaw. I just love the look. I am looking for a time that will release the full potential of the stock motor. I know it is being held back and want to release the beast.
I looked at the 2021 but...
Morning all has anyone here in the Uk used tune ecu and more importantly be prepared to do mine. I have read various post and just can’t get my head around it. I did the Meerkat exhaust mod yesterday and am keen to get a new map loaded more suited to the slightly more free flowing exhaust. Or is...
Anybody put a custom map on their Rocket?
I got one from dnk tuneworks. Just ran it on the dyno 177 rwhp 154 ftlb torque and now have 100% throttle in all gears really woke the bike up. Can not wait to find an exhaust and intake I like. Not much of a torque curve just a straight line from 3000...
At 3,000 rpm, which is 80 mph in 5th I'm getting a gentle thump in my left foot peg. Feels almost like the kickstand bouncing a little, but it's not. Same in 4th at 3k. I haven't noticed it in lower gears or other rpms. I don't hear anything, just feel it.
The tuner asked me where I tend to...
hi all,
Last ditch effort for help before going to dealer..... I flashed the nels full remap tune in resources but bike didn't like it.
Now when I try to flash any other tune it says its done but when I read the ecu it's some weird set of tables that doesn't match any tune I have on file...
Hey all, was hoping to have this all done by now but Covid has caused quite the delay in getting my exhaust. I FINALLY got the email saying my system was off to the chrome shop so I'm holding out hope I'll see it within the next few weeks so it's time to find a tune.
07 classic with triple KN...
Hello all,
I recently purchased a 2006 Classic. The previous owner has installed a Raask 3 into 2 no cat exhaust a Power Commander 3 and it has a stock air filter. I've ridden it the last couple of days and it seems to be running rich. It has a pretty strong fuel odor at idle. I haven't hooked...
I have been looking through available information in the forums and I am struggling with the definition of earlier vs later models of the Rocket 3 Roadster for use with Tune ECU
I bought my Roadster new at the end of 2018 but the VIN ends in 857443 which looks like that means it is an earlier...
I have a triple K&N system on the way and was wondering if I needed to change the tune if the exhaust stays stock. Basically will just the intake swap make the mix more lean if exhaust is unchanged.
I have ordered a viking 3-1 from Paul on the forum but sadly it will take a few months to get...