rocket

Recent contents Top users
  1. nicksr3

    Hi All! Have my 2025 Rocket GT in the shop for starting issues.

    Diag is that the injectors need to be removed for professional cleaning, and the fuel filter needs to be replaced. Makes no sense, but that's what happened to my bike with only 900 miles on it.

  2. I HAVE A 2020 ROCKET 3 GT, I WASHED THE BIKE, DRIED IT AND STARTED IT, MOVED IT INTO THE GARAGE, THE NEXT MORNING IT WOULDNT START, I REPLACED THE KEY

    I HAVE A 2020 ROCKET 3 GT, I WASHED THE BIKE, DRIED IT AND STARTED IT, MOVED IT INTO THE GARAGE, THE NEXT MORNING IT WOULDNT START, I REPLACED THE KEY FOB BATTERY, CHECKED THE BIKE BATTERY, ALL ARE FINE, RELACED ALL THE RELAYS AND BIKE STILL WONT START, EVEN THE EMERGENCY BY PASS UNDER THE SEAT...
  3. concours

    Fork seals replacement on 2014 Rocket III Touring

    They've been weeping a long time... finally leaked a bit more. Mad wheelies have taken their toll..

  4. Rocket 3 GT 2023 clocks and left switchgear

    Hi Alk, I’m new here and just had a rocket 3 with some damage. Currently only the warning lights come up on the clocks but nothing on main part, and nothing works on left hand switchgear except it’s backlit… any ideas welcome
  5. mexican

    My Rocket wanted a sparring partner, so i got it one

  6. Jagster

    Great video showing servicing a 2.5L Rocket

  7. Neolise

    Engine guards 1st gen rocket

    Picked up a set of engine guards from ebay for my rocket hoping to mount some hwy pegs to. Instructions were very vague to say the least. Any one have experience installing these?If im not mistaken the engine is a stressed member and ties to the frame up front? One long bolt through so...
  8. dfresh

    BT Moto Tune Review - 2024 Rocket 3 GT

    I recently purchased the flasher and tune from BT Moto so I wanted to share my impressions of the tune. The short answer is that I think it’s well worth the money for those who don’t want to deal with an independent tuning shop or have newer models with ecu restrictions. So for some context I...
  9. Aden Rich

    New 2008 Rocket III Touring Owner

    Hi everyone, Just wanted to introduce myself. I recently picked up a 2008 Triumph Rocket Ill Touring and am looking forward to getting to know the bike.I live out in Arizona and love the open roads out here. Glad to be a part of the forum and looking forward to learning from all the knowledge...
  10. Exnavrig

    Rocket 111 Shiny Bits

    Hi fellow Rocketeers 🙂 I've been bumbling round on my Rocket for a few years and I'm looking to see if there might be anywhere in the UK (or maybe even Europe) that might sell replacement chrome parts for 2004 Rocket 111s. Long story cut short, the chrome parts have become pitted/rusted and are...

  11. Anyone has Cylinder compressor reading from Rocket?

    I am looking to find cylinder compression data, as I would to cross check/verify mine against data. if someone has it, please share Either 2.3L or 2.5L , either one works Thanks
  12. Jai Bei

    2006 rocket three classic misfire

    I pulled my bike out. Had it running for a minute and warming up getting ready to take a ride and suddenly started Misfiring ignition was changed a year ago. Can’t find any loose wires. Everything seems fine. Was tuned up less than a year ago. Any ideas?

  13. New Jersey rocket rider

    Greetings from NJ 2025 storm gt . Owned it about a year or so. So far so good.
  14. Journeyman

    Rocket Sighting

    I can probably count on one hand the times I've seen another Rocket in the wild, other than our organized rides. Today, the owner of this immaculate 2013 Touring was also passing through Jonesborough, TN. The owner and his brother stopped by to say hi as I was gearing up to leave and he kept...
  15. saltire

    Rocket 3r 2021 tune ecu fault code?

    Hi i just flashed the bike for the 1st time everything seemed to go ok until i checked the error codes and i managed to clear the cruise control one , but my check engine light is now on with the error crankshaft position not adapted , it says to clear this adapt the crank position and then...

  16. Rocket 3 R storm Swing Arm Casting Marks

    After fitting IXIl exhaust on my 2025 Storm R I noticed a casting mark underneath the paint finish on Swing Arm - Contacted Triumph via my local dealer and was told that this mark is a Casting Mark and not a defect and is normal and present on all Rocket 3 models - it is usually hidden behind...

  17. 69 years old rider. 2024 Rocket 3GT I have had it for 12 months.

    My 2024 Rocket 3 GT has a problem that I will post in tech. Me....69 years old life long motorcycle nut
  18. ReverseGreen

    Rocket 3 clutch issues

    So I have been having issues with the clutch on my 2005 rocket 3. I had the clutch lifter piece friction weld to the shaft and shear off. I suspect the clutch wasn't entirely disengaging. I have since replaced the lifter piece, lifter piece bearing, lifter shaft and pressure plate to upgrade...

  19. TRIUMPH ROCKET 3R GT EBC Rear disc rotor is finally out

    I sent them email asking about price and when it will be ready for sale and now it is, I have to change my rotor because oem rotor has excessive play in it because of steel quality issues and its clunks when I move bike back and forth and use rear brake, even clunks when I move rotor by hand...
  20. Vhunter45

    Motea Crash bar install for 2014 Rocket.

    Hello Everyone, Just purchased a set of Motea Crashbars for 2014 Rocket. They don't come with mounting instructions. Does anyone know where I might find some installations instruction for the bars?
Back
Top