clutch

Recent contents Top users
  1. tdragger

    Advise on Clutch Update

    Got a 2006 Standard with 77k miles and the clutch is slipping in 5th gear roll-ons. Also slipped during a dyno run. I've decided to go with a complete Barnett kit for $246 for fibers, steels and springs. Triumph Rocket III (2005-2010) - Barnett Tool & Engineering My question is in regards...
  2. Jabo75

    New clutch slipping at higher RPMs and hard throttle

    So I brought my R3 to a dealer o have a clutch replaced in November. I just got it back a week ago. Yep, they blamed everything they could including covid. Anyhow, my new clutch is still slipping when hard on the throttle at 5-6,000 RPM. Not in first, usually in second, and sometimes in 3rd . I...
  3. Kevin frazier

    Clutch switch movement

    Does your clutch switch on your touring have about 2.5mm of free play where it can be pushed in and out. Pictures below out is normal position but i can push mine in to stop which is 2.5mm. I’m wondering if my clutch switch is starting to go bad and this free play is a sign of a switch thats...
  4. TURBO200R4

    CLUTCH SWITCH SIMPLE TEST

    while helping out on the the diagnoses of clutch switch i have have learned a little myself. so in the future i would suggest when the checking clutch switch use a volt meter. place one black to lead to to (earth)ground (suggest neg bat post) the red lead to the terminal that has approximate 5...
  5. fastfun

    clutch basket installing issue

    After installing a new oilpump something is not going well installing the primary gear of the basket into the crank gear. I did this job already once before but this time I think I do overlook something somewhere in the installing procedure.The oilpump drive pegs are into the back of the...
  6. ArekDeBoss

    Clutch sensor problem

    So lets start from the beginning some of you might even remember I am fully capable of fixing your dog or cat but I have no idea how to fix motorbikes. So i apologise in advance if some of my questions or actions look stupid to you. I had a problem with clutch sensor from the moment I changed...
  7. Journeyman

    DIY Beginner Upgrades Cams & Pistons - Lives To Tell The Tale

    I just finished a Neville Lush piston and cam rebuild in ""record time"" with no prior experience. I had allowed myself a full five days during the Christmas holidays for the install. Well, now, more than three months later, I’m finally in a position to say, "job completed!" and share this story...
  8. Mad Dog

    Leak at clutch lifter shaft

    I’ve got an oil leak, think it’s coming out under the clutch lifter arm. Red arrow in the pic below is my first guess...reasonable? That part appears to be a seal but isn’t ID’d in the manual or online parts diagram. What is that? An o-ring, washer, packing? Anybody know what size? Can I pick it...
  9. bebsy

    Clutch bearing collapse

    Hi had my clutch fail, upon inspection the roller bearing that holds the plunger in place had collapsed I'm Tryng to locate parts but triumph world and the triumph manual list it as a needle bearing I have attached a pic its not so clear to tell as it lists a wavy washer and some other washer I...
  10. R-III-R Turbo

    Help re OEM clutch switch please

    Hi guys I need your help with something. It's been a few years since I had the clutch cable (converted to TTS hydraulic). I'm going back to the cable with the 2.5L stroker, but I seem to be missing a small part. I reckon a plunger and spring are missing from my clutch switch. Could someone...
  11. Journeyman

    Barnett Clutch Install - To Jutter or Not to Jutter, that is the question

    I'm starting in on a Lush cam and piston install on my '11 Roadster and would appreciate advice from anyone with experience installing a Barnett clutch. I've come across posts where some say to leave out the stock anti-judder seat washer and spring, which is not part of the Barnett kit...
  12. Timbo

    Clutch adjustment/issue

    Hi all, Bought my 2013 Rocket III Roadster in Jan this year as an insurance write off, cosmetic damage only. It had 962 miles on the clock and I have no idea of the history, how long it had stood and where. Got it all sorted and back on the road but have had clutch "issues" ever since. The...
  13. Idaho Red Rocket 3

    EBC Clutch Plates and Springs

    Have any of you guys used or tested EBC clutch plates or clutch springs ? What is known about these products ?
  14. Frosty Rider

    Clutch issues

    Ok, this is driving me crazy, my clutch we out of adjustment suddenly, checked the cable and it is good, (only a month old) I have adjusted up, down, and all around, and I can't get it quite right, I have never had this much trouble with a clutch before. currently, When stopped you can feel it...
  15. Kim Turner

    Clutch cable lengths

    What is the correct standard length of the 2007 Classic clutch cable? What will fit from previous or later years? Thank you
  16. R-III-R Turbo

    Hydraulic clutch release went pop

    So I'm pootling along in 5th and coming up to a roundabout, go to change gear and find my clutch lever is limp. So i had to take that roundabout in 5th gear :eek: Worked the throttle then to get the tranny to that nice unburdened point in between being pushed by the motor and being dragged by...
  17. Cherokeekid78

    Want to Buy *NO LONGER NEEDED*Clutch Switch

    My switch broke recently. I have it bypassed right now to run the bike but I don't like my fuel gauge being inoperable. I know it comes as part of the entire switch assembly do in willing to buy that. However I really don't want to spend $160 just for the switch. Anybody got one they are willing...
  18. Justin Lakes

    TTS Clutch issue

    I've been fighting with the hydraulic clutch on this since the build... with leaks due to bad O-Rings and such, but one issue that hasn't went away is under Hard acceleration the clutch lever becomes limp. You can actually feel the lever begin to collapse under full throttle , you can then give...
  19. Cherokeekid78

    Clutch switch broken

    So today my clutch switch broke in the housing. To start my bike I have to hold the little pin in the switch to complete the circuit then start the bike. Is there a quick fix that I can do to avoid having to do manually hold the pin in? I'm planning on riding to the dragon's back tomorrow so...
  20. BDClone

    New Clutch Install

    I got my new clutch kit with springs from Carpenter Racing. I will be replacing the oil and coolant and ordering a new clutch cover gasket. It was mentioned that I should change out the detent spring as well. Only 4700 miles on the bike. Any thing else I should look at possibly changing while I...
Back
Top