If any one has a part number for the heavy duty Barnett clutch spring set only, can you please let me know .I would like to purchase a set but would rather not have to buy the fibers and steels as well. Cheers
Love this video by Triumph but have they got a problem or am I just unlucky? Do these bikes in the video survive?
Riding Rocket 3 R
Problem: Took the beast for a few laps of a race track where she performed nicely. But then, a quick launch - wanted to do a straight line run, try to spin up...
Guys, does anyone in the US have a knackered clutch basket that they could let me have the back plate? I sent a basket over to MTC to get a new one built, they found that the back plate is knackered. That is one of a few parts they actually need to build my new set up. see pics
quick question, i replaced the fibres and steels in the clutch with the Hyabusa clutch kit, it also came with new springs for the pressure place, if anyone has used this setup, did you use the stock triumph springs, or the Busa ones, the differences between the two are,
Busa spring is 2mm...
I recently had to change out clutch pack. Oem fibers and other makers are about 20 bucks for fibers and 15 for steels, i bought a hyabusa kit and installed and it is butter smooth and works flawlessly, so im putting this up as the busa kit is 159, the math is obvious, the anti judder washer and...
Hello all!!! I recently picked up a used 2005 Rocket, I love it. One of the first things I did was install a heavy duty Barnett clutch without issue. Put on about 500 miles no problems at all, noticed that the clutch adjustment at the handle needed to be tweaked to give me the recommended 2mm of...
I was having issues with my 2012 Rocket 3 intermittently starting. That is a sinking feeling when you are miles from home, no cell signal and the nearest service station is farther than you want to walk. I don't really care to leave her by herself either. I finally figured out I was able to...
Hi,,My rocket roadster clutch is on its way out,,slides on full power,,engine has been dynoed at 200 horse,and desrestricetd fully,so I,m guessing if I,m going to rebuild clutch,,it may be wise to upgrade springs friction plates etc,etc,,has any one done this,,any tips would be appreciated,i...
Hello!
Just put the tune on today, one of power_tripps. 3 filter 100% power and jardines...
So the speedo doesn't work anymore (cleaned the magnet, didn't fix it) so i don't know how fast i was going.
From a roll about 20 Id hit it, it'd hang around 5k but still be speeding up. Eventually it...
greetings everyone
I was hoping someone here can help me out with information on the fibers and plates for the clutch. there is no way to have them sent by anyone around the world in less than 45 days. So, someone here (thanks) told me the Hayabusa fibers can fit. So the dude at the store...
As time went by, I started to feel a little slip on the clutch on 1st gear, recently moreover. I Reckon the previous owner did not have this bike a clutch service, left aside changing the plates and so on. So I think it´s time to do so. BUT, for all the pandemic issues and the fact that there...
New to the group-really appreciate the experienced tech input of the rider group. Long time rider and repair my own type of owner-Just picked up a major crash 2012 R3T with abs with 450 miles. (Prev owner pulled a wheelie at 100 and decided he wanted to spend a few weeks in the hospital)...
Got a 2006 Standard with 77k miles and the clutch is slipping in 5th gear roll-ons. Also slipped during a dyno run.
I've decided to go with a complete Barnett kit for $246 for fibers, steels and springs. Triumph Rocket III (2005-2010) - Barnett Tool & Engineering
My question is in regards...
So I brought my R3 to a dealer o have a clutch replaced in November. I just got it back a week ago. Yep, they blamed everything they could including covid. Anyhow, my new clutch is still slipping when hard on the throttle at 5-6,000 RPM. Not in first, usually in second, and sometimes in 3rd . I...
Does your clutch switch on your touring have about 2.5mm of free play where it can be pushed in and out. Pictures below out is normal position but i can push mine in to stop which is 2.5mm. I’m wondering if my clutch switch is starting to go bad and this free play is a sign of a switch thats...
while helping out on the the diagnoses of clutch switch i have have learned a little myself.
so in the future i would suggest when the checking clutch switch use a volt meter.
place one black to lead to to (earth)ground (suggest neg bat post)
the red lead to the terminal that has approximate 5...
After installing a new oilpump something is not going well installing the primary gear of the basket into the crank gear. I did this job already once before but this time I think I do overlook something somewhere in the installing procedure.The oilpump drive pegs are into the back of the...
So lets start from the beginning
some of you might even remember I am fully capable of fixing your dog or cat but I have no idea how to fix motorbikes. So i apologise in advance if some of my questions or actions look stupid to you.
I had a problem with clutch sensor from the moment I changed...
I just finished a Neville Lush piston and cam rebuild in ""record time"" with no prior experience. I had allowed myself a full five days during the Christmas holidays for the install. Well, now, more than three months later, I’m finally in a position to say, "job completed!" and share this story...