Painted Body kit $250

[Ishrub]

keyless fuel cap rocket III | eBay


Morris, @R3Tex, has one, not sure which, but the black has come off.

Someone else mentioned they have the SSR brand, don't remember who, and it was good so far.

I think I am going to go with one of these >>> Slingshot Racing : Triumph Billet Quick Release Keyless Gas Fuel Tank Cap Lid - $74.99

- Made from Billet Aluminum (6061 T6)

- Manufactured using 100% CNC Machining

- Anodized Coating

- Push Button & Quarter Turn Lid Design for Easy Removal

- Comes with: (1) Fuel Cap Base (1) Fuel Cap Lid - [Reuses the stock bolts]

Thanks for the link. Added photo and details of your $75 pick above.

This one looks simpler and only $50

Slingshot Racing : Triumph Keyless Billet Gas Fuel Cap - $49.99

- Made of Heat Treated (Billet) Aluminum [6061-T6]

- Manufactured using 100% CNC Machining

- No Casting or Molding are involved in the Manufacturing Process

- Finished with Anodize Coating

- This listing comes with: (1) Base (1) Keyless Screw Lid

 

[WyldCFH]

Thanks for the link. Added photo and details of your $75 pick above.

This one looks simpler and only $50

Slingshot Racing : Triumph Keyless Billet Gas Fuel Cap - $49.99

- Made of Heat Treated (Billet) Aluminum [6061-T6]

- Manufactured using 100% CNC Machining

- No Casting or Molding are involved in the Manufacturing Process

- Finished with Anodize Coating

- This listing comes with: (1) Base (1) Keyless Screw Lid

Yeah, they have a couple versions. I just happen to like the push button and turn version

 

[Ishrub]

Yeah, they have a couple versions. I just happen to like the push button and turn version

Would the much smaller opening on the push button and turn version be a pain with splashback when filling the R3 tank with the baffle plate etc underneath? Using the stock one, I find I need the wide opening to angle the nozzle to prevent splashback and nozzle auto cutoff.

 

[WyldCFH]

Would the much smaller opening on the push button and turn version be a pain with splashback when filling the R3 tank with the baffle plate etc underneath? Using the stock one, I find I need the wide opening to angle the nozzle to prevent splashback and nozzle auto cutoff.

Good points. I tend to hold the nozzle just under the baffle to maximize the fill up. Part of that is seeing the placement and fuel level. Wouldn't be easily done with the smaller hole.

 

[1olbull]

Does any keyless gas cap fit this tank?

Yes indeed!
Shall see if I can find it.

 

[1olbull]

Thanks for the link. Added photo and details of your $75 pick above.

This one looks simpler and only $50

Slingshot Racing : Triumph Keyless Billet Gas Fuel Cap - $49.99

- Made of Heat Treated (Billet) Aluminum [6061-T6]

- Manufactured using 100% CNC Machining

- No Casting or Molding are involved in the Manufacturing Process

- Finished with Anodize Coating

- This listing comes with: (1) Base (1) Keyless Screw Lid

That there is the one I've been using for a couple years now. Works great!

 

[1K9]

KTM TRIUMPH APRILIA FUEL GAS CAP 675 955I 990 Mille RSV | eBay

Looks just like this one. My doubt was about the six top screws. The tank seems to have just three holes on the outer edge. Also, did the screws come with the cap?

 

[WyldCFH]

I haven't taken mine apart yet. I did notice the 3 mounting holes on the new tank you purchased and went searching for pictures of other R3 tanks. Seems they all have 3 mounting holes, the other 3 must be for looks.

Most replacement fuel caps i've seen mentioned using the existing bolts. The one in your link doesn't state either way. BikeBandit should have the part number so you can order some

 

[R3Tex]

3 holes is correct. 3 of the ones in tje cap are dummies

 

[Triple Trouble]

3 holes is correct. 3 of the ones in tje cap are dummies

If you look closely at the pic of the black cap on the yellow tank you can see that 3 of the screws are at different heights.