roadster

Can anyone recommend good TuneECU map for the following setup: 2011 Roadster, VIN 495xxx TOR slip-on mufflers (these eliminate cat. converters on Roadsters) 3x K&N 2780 (should be close enough to RamAir / other foam filters) I'd prefer something that's dyno proven, and retains the O2 sensor...

I just finished putting Classic bars on my 2012 Roadster. It is a pretty easy job to be sure. I offer this FYI in case some interested in doing this may find it helpful. This very simple technique utilized the OEM cables and brake lines, requiring NO cables or brake line replacement. Nothing...

Does anyone make a lift adapter for safely lifting both ends of a Roadster simultaneously for tire changes etc.? I tried searching some of the old threads but it sounds like the Roadster frame is slightly different from the earlier bikes, and also some of the earlier lift adapters are no longer...

I'm looking to buy TORs or other slip-on mufflers for my '11 R3 Roadster (dual mufflers). I might also entertain a full exhaust that doesn't burn my legs in stop-n-go traffic and is reasonably priced. Let me know if you have an extra set or are planning to go with a full system and want to sell...

Hello, I am thinking about adding the factory fogs to my bike. Has anyone got these and could share photos. I am curious how they would look. thanks. sds

Hey folks, I'm looking at a new 2014 Roadster that's heavily discounted, its black gloss with the red stripes. I really want 2015 with the matte finish, but for the 3000 more it would be, it's not really worth it since I can just have the panels painted for less than a grand. So my honest...

Is there a thread on here with instructions how to swap out standard rocket foot controls for roadster items. I know it may not be a straight swap..... Simon

Okay, so I picked up a "Classic Footboard kit - A9758081" from eBay this week and I'm starting to go over the parts. Everything was supposed to be included in the kit from a dealer and I know I'm already missing a few small items - that I can pull from the Roadster controls but will ask them to...

Guys Having replaced my battery for an AGM one, the fuel guage registers zero miles and there are no little black bars which tell you how full the tank is. When you turn ignition on the bars show up during the needle sweep. It has fuel in it, is somethiing stuck and a fill up might help or take...

I'm trying to make my own lowers and got the template, etc... that's available on here. However, my memphis shades kit didn't fit the outer tube on the roadster. Anyone with a setup of calibers care to take a quick measurement and tell me the size? They are listed as 43mm but I don't know if...

Hello, Folks, Just checking in, as I expect to be an official owner very soon (R3R). I bought a Storm in August and have had my share of problems, so I'm in the process of making a swap with Triumph. I'm headed for the 2014 matte black & white. Incidentally, I rode the bike for the second time...

These are the results of light meter testing regarding the Daymaker headlights (two 5.75") on a Rocket Roadster. The testing was done pursuant to accepted protocol. Note: Testing is done using low beam settings. The horizontal zero is located at the left side of the vehicle, therefor the...

Im not the best with a computor so im looking for someone in the midlands that can help to retune my roadster 2012,It has been decatted and k&n + Zard pipes fitted. it has a very annoying backfire i would like to tune out, i have spoken to hansO and he has kindly offered to send me a tune to...

Dark-Side recommendations for 2013 Roadster? - Federal SS-595 245/50 98V TL BSW - Kumho Ecsta AST 245/50-16 - Bridgestone Potenza RE97AS 225/55-16 - BF Goodrich G-Force 225/55/16 - Riken Raptor ZR, 225/55/16 Radial - Saffiro SF6000 225/55/16 - Nankang NS-20 Nobel Sport 225/55-16 - Dunlop Direzza...

Hello I'm Jeremiah and looking at purchasing a R3 Roadster. My local Dealer has a 08 R3 with 9,300 miles for $8,500 but it isn't a roadster. Would that be a good deal? I currently ride a 72 HD Ironhead with a lot of stuff done (stroked, ported, cams, exhaust, ignition, carb ect.) that is...

Disregard, there is a work around and the good TuneECU tuners know it, get thee to a Dyno!

After a set of Pannier rail dresser kit with fitting hardware in good condition Part #A9738088........ looks like it is another item that Triumph has stopped making Also after a Roadster Leather Tank cover Part #A9520067

2014 Triumph Rocket III Roadster

Just wanted to say hello and it's great to be back on a new Rocket! Are there any Rocket 3 Clubs in Florida or does anybody know of any events for Rocket III riders? Al Bundy

Im looking for some shorter slip on slash cuts for my Roadster, if you you tube roadster slash cut theres some which look exactly like the stock pipes but finish just near the rear spindle instead of near the number plates...any ideas/suggestions ??