radiator

Recent contents Top users

  1. Radiator cut

    Posted this on .com site, thpught id do the same here - plenty of good blokes on both forums. Considering thinning that wide ugly radiator... Basically cutting along the lines of the 2 side covers so its flush with the engine, weld a couple of side plates to the cuts - from a quick look, there...

  2. Radiator Grill

    Hi is it possible to powdercoat rad grill?
  3. Sidecar Flip

    R3 Standard (2300) Radiator Insert (overlay)

    As usual, the price is commensurate with the materials. I realized a substantial reduction is materials cost due to a reduction in the overall metals market. I was able to procure Carpenter Technologies Number 8 mirrir polished stainless sheet at a substantial reduction in cost...
  4. R3R2011

    Radiator shroud rattle

    Any good ideas on how to get rid of that awful vibration that comes from the radiator screen?

  5. Leaking Radiator

    Greetings to all, This is my first post and sadly it is to ask if anyone has removed the radiator from an R3, and if so, is it a difficult proposition. It doesn't look like it would be hanging out there all by itself but I thought I would ask first before I tackled it. Had a very low speed...
  6. TOMCAT

    Blown radiator hose

    Blew the radiator hose yesterday. Phone call the shop, none available in Australia ( 4 week wait on back order) OEM hose is taperd 24mm on one end 19mm at the other. Visit to local auto shop and found similar shaped 21mm hose. Made to fit a 1967-1973 Hillman Hunter, at least its British i guess...
  7. Sidecar Flip

    Polished Stainless Radiator Inserts

    I'll fess up, I went and put a Touring Insert on Flea-Bay this afternoon. I have a number of Radiator Inserts that have minor blemishes on them, blemishes that won't show up when the insert is installed on the bike but blemishes nonetheless. I'm not going to offer them on the website because...
  8. Sidecar Flip

    Reduced pricing on all radiator inserts

    As promised, I've reduced the pricing across the board on all the Flipmeister Signature Polished Stainless Steel Radiator Inserts. I have depleted my previous inventory and the new pricing reflects the lower cost of polished stainless. They were $149.00 USD, now...... All Inserts are now...
  9. OE-Guy

    Thinkin of painting the radiator sides...

    Guys, I'm thinking that the radiator sides and top pieces are plastic chrome... Anyone see any problems with scratching them with fine paper and spraying them flat black? I see no reason to spend good money to buy new black ones when a few coats will do the job. They don't seem to get hot=I...
  10. Sidecar Flip

    Classic Radiator Inserts Update......

    Due to many requests, I'm bringing back the R3Classic Radiator Inserts in Polished, Number 8, domestic (Carpenter Technologies) Stainless Steel. I had a problem with a high rejection rate because of the way the 'Classic' script is positioned on the insert but after careful re-plotting of the...
  11. Ugarte

    Radiator shrouds and air flow

    Just installed a 25 inch clearview windshield with recurve but no air vent and it significantly reduced turbulent flow compared to the Roadster screen but it wasn't as good as I had expected. I have the lowers too. Looking at the radiator shroud I wondered if all that junk might be creating...

  12. Painting the radiator and bearclaw

    I have seen a few photos of this done and it is the look i want until I can justify fitting a slimmer radiator. The question is how do you paint chrome? The radiator shrouds are plastic and the bearclaw metal. I imagine the grill would be best powder coated. Thanks
  13. dublflush

    Not so ugly radiator

    Started making these end caps for the roc. I think they make it look more presentable . What do you think?
  14. grill insert

    grill insert

    a little something for the front of the bike.
    • triumphdude76
    • Media item
    • grill radiator
    • Comments: 1
    • Category: Member Galleries
  15. dw_raider

    braided radiator hoses

    Has anyone put braided radiator hoses on their R3 standard? would really love some feed back:cool:
  16. Big bugga

    radiator surround

    After joining recently I have tried the search and also tried just trawling through but I mist be doing something wrong. I am after a replacment chromed radiator surround. I can find links to black and carbon fiber ones but no chrome. Anyone have any ideas?

  17. Radiator Fan...

    .... keeps on turning, long after the engine has been shut off:eek:. Watched the thing go on regardless for over 15 minutes. By then, the engine was almost cold. Only way to stop it is to disconnect the battery. This is happening to a friend's Rocket, every time the engine is switched off. Any...
  18. Sidecar Flip

    Polished Stainless Radiator Inserts...

    This has been a long and much more involved project that I first thought. However, I'm very hopeful that all of you will like the end result. I'm very happy with the outcome. First off, I'd like to thank the people who allowed me to bring this quality product to fruition. I'd like to thank...
  19. hombre

    Latest Intercooler/Radiator/Oil Cooler Combo

    Here's my new Intercooler/Radiator/Oil Cooler combo from TTS. I have to compliment Richard and his crew at TTS... the workmanship is excellent! This unit is 1" narrower in overall width than my original unit, and has a removable stone grill for repairs. It also has reinforced sides and pressure...
  20. cane corso

    The new radiator look

    You guys didn't say much on my post about my vents when I posted them unfinshised, I think no one could visualize them finished. So here's some pictures with the finished product. It is painted and it looks even better up close. It makes the radiator look smaller and not so plain. I think this...
Back
Top