I'm a bit worried as i couldnt find anyone else who had this issue in a quick search, but todayI checked my 07 R3 oil level today, it was almost a quart low. I just changed the oil (10-40 Amsoil) about 1000 miles ago, and yes i did start the bike and let it run for a while when i did the oil...
Here is an idea I had for the stock touring air box. I got the idea from a guy named "Turbo Tom" who has a performance bike shop in Orange County, CA. He did the same thing for the Honda ST1300 and everyone who did it claimed a power increase.
Our air filters have the same size opening at the...
Can you guys tell me where I can get some risers and how much height I can get away with keeping the OEM cables and wiring. I'd like for my bars to come back to me a little more. Really offset rearward risers is what I need. Can I get by with 1" or 2"? Thanks all.
Hi All,
I have an 05 R3 with TORS, no CAT, and PCIII. Right before my 20k service, my bike was idling rough and shutting off. I took it in for service, and the problem was corrected. However, about 10 minutes after leaving, the bike started idling around 1500 rpm, and engine braking was...
Which blue on the '09 R3T is "Azure" blue?
Is it the lighter of the two shades on the bike, or the darker?
I put a light scratch on my tank, and need to know what touch up paint to order: azure or eclipse.
I need the lighter shade, whichever one that is.
Thanks,
CW
im be getting a new front tire soon but thinking bout changing brand from a metz to one of these and would like some feed back which would be apprciated
dunlop 404 150/80/16
avon am41 venom
avon av71 cobra
oh btw im runny a c/t on the rear
I would like to do this mod to my bike. I can't find what K&N part number I need for this. I see a lot of people saying to use RU-2780, but they are all riding standards or classics. I looked under my bear claw, and there isn't a hell of a lot of room under there.
What filters do the...
I currently have a set of the TORS pipes mounted on my 08 R3T. It is running the proper Triumph tune for these pipes.
If I go to triple K&N's, I will need a new tune, right? What tune would I want? Would my dealer have one?
Thanx!
Matt
What do most people do with their stock headlights?? I find low beam too close to the bike and dosen't illuminate the road and if you adjust them so that low beam is half decent... hi beam is up in the trees somewhere... worst bike light I have encountered....:(
There are 4 hard points on the sump that look as though they are there by design for lifting the R3 with jack, but I did hear that this may cause some damage. Any info on this subject & also on custom made mounts to work in conjunction with a jack for lifting the R3 would be great. Thx
Hey all. I'm looking for other R3 owners in the area of Northern NJ. Primarily in the Morris, Sussex, Essex and surrounding counties area. I'd also like to set up a user group if anyone knows how that's done.
Thanks
Bob
Can a 2010 R3T be set up like a Classic? What I mean is can I program my bike to have the same quoted 160 hp, 150 torque as the Classic? This (quoted) 100hp/160lb/ft torque just ain't enough. I absolutely love this bike and won't trade for a Classic, but would love more power. If I were rich and...
Hey gang,
I can't get my 2008 Rocket III Touring to run right since installing Jardines. I have a single K&N under the seat and I'm not inclined to attempt the triple K&N mod, so please don't suggest that!
I'm getting lots of popping on deceleration while downshifting, especially while...
Got my tachometer installed yesterday at Gulf Coast Motorcycles in Ft. Myers, FL. It's a KOSO, with a water temp function as well. Fits beautifully and except for the mount to the bars being a little flimsy - I couldn't be happier. It was a lengthy install (3.5 hours), mostly related to the...
Folks. Could be old news but I found out and confirmed with Cobin that they finally offer their beetle bags up through the 2011 Roadster. They are however very proud of them.