here is exactly what I did for the r3t I wanted to spend the least I could to get it on the bike. The first thing I did was add a lighter plug where the power socket can be fitted by the left side cover, that covers the power to the unit. after hooking up the amp I added a water proof switch on the down tube right beside the plug for the amp, I am not concerned about cutting off the player I just pull it off the dock to cut it off. I went ahead and got a cheap receiver they all come with a sticky mount that I mounted to the left hand side of the tank about mid way up now there will be 3 cables coming from the dock power, antenna and a inline volume control. the volume control is just a small cable that you can get at radio shack it has a little turn nob on it to adjust the volume. I went ahead and got a pack of sticky wire clamps and placed those on the tank to rout the cables as well as hold the volume knob where I could get to it with my left hand at the base of the tank . I tucked all the extra cables under the left side cover and ran the antenna under the seat strap you may have to play around with the antenna a bit to get it good. the only other thing you will need to take it between the truck and bike is another car kit and thats it.