Jvheli
Nitrous
So your saying put in three Carpenter springs and two stock spings? I think iirc there are only 5, so it cant be done evenly....
TURBO200R4
stand up straight and grab the world by the a$$
I would think that u could use 3 (2 then across 1)would work OR 2 ACROSS FROM EACH OTHER. sorry caps
1olbull
Riding Motor Since 1950
scot in exile
Living Legend
I have the carp springs and do not notice much a difference from my other rocket with stock springs
but then again my hands get up to no good every day
but then again my hands get up to no good every day
warp9.9
Pocałuj mnie w dupę
Use all the same springs for equal tension on the spring towers. No matter what the brand. Period end of discussion!!!!!
TURBO200R4
stand up straight and grab the world by the a$$
i have a good idea
do it like warp says.
i am out off here
do it like warp says.
i am out off here
Jvheli
Nitrous
Lol. Hes kinda direct! I was planning on just using whats in the kit. I can always change springs later if I dont like it.
Jvheli
Nitrous
Christmas came late for me, but I finally have everything back!
@R-III-R Turbo mentioned to check for swarf. There was some in my coolant passages too, this is NOT from Carpenters head work. The chips from head porting are very small.
Also, the APE tensioner is now black, which saved me having it made black!
@R-III-R Turbo mentioned to check for swarf. There was some in my coolant passages too, this is NOT from Carpenters head work. The chips from head porting are very small.
Also, the APE tensioner is now black, which saved me having it made black!
Jvheli
Nitrous
What have you guys done with the secondary throttle plates? Mine are still there, doing nothing.
1olbull
Riding Motor Since 1950
Similar threads
