Paul Bryant full system for 2.5 R3

[Idaho Red Rocket 3]

Where does Konrad do his magical tuning ?

 

[Nashvegas]

Where does Konrad do his magical tuning ?

Near Hartsville, TN

 

[Dr.D]

If I didn’t own the TFC I’d buy that thing in an instant. I just can’t bear to alter the stock bike yet. I have one of Paul’s pipes on my Roaster and it is well built, looks good and adds performance. The sound of a properly piped Rocket is unmistakable

 

[Paul Bryant]

Looks and sounds a lot like this one someone posted on TikTok, but different branding
Clicky

That is an etirely different system altogether and looks nothing like my system.
Also that bike is a GT.
The GT pipe will not fit the R with it's mid mounted footrests.
The first pipe that I built was on a GT, I had to completely redesign the pipe to suit the R.

 

[Paul Bryant]

As promised here is a video with the exhaust.

Here is a better picture of the O2 sensor. Can't tell from the picture but there is about a 1 - 2 mm clearance around it.

And another shot of the new versus old manifolds. Take a close look because the black is not all open port, just the smaller ring is open. The stock header also has a much sharper bend from the head than the Viking exhaust which has a much gentler radius.

I've since altered the postion of the O2 sensor for far more clearance.

 

[Tal]

Looks and sounds a lot like this one someone posted on TikTok, but different branding
Clicky

I think you should do another comparison ...looks nothing like Paul Bryants system at all!..

 

[Nungers]

The GT pipe will not fit the R with it's mid mounted footrests.

Bummer, I have the midmount pegs on my GT. Will you be doing an R version Paul

 

[Paul Bryant]

Bummer, I have the midmount pegs on my GT. Will you be doing an R version Paul

As mentioned above, I first built the pipe on the GT, but then found that it was not compatable with the R footrests.
The GT pipe would physically bolt on no problem but there was no room for your right foot !
So I completely redesigned the pipe to fit the R, this pipe will fit both the R and the GT.
So your GT with the R footrests won't be a problem at all.

 

[Neville Lush]

Your pipe looks excellent Paul..

 

[vsteel]

Got the bike on the dyno and got some results. First run to the last run. +12hp and 7ft-lbs of torque increase.