Paul Bryant full system for 2.5 R3

If I didn’t own the TFC I’d buy that thing in an instant. I just can’t bear to alter the stock bike yet. I have one of Paul’s pipes on my Roaster and it is well built, looks good and adds performance. The sound of a properly piped Rocket is unmistakable
 
Looks and sounds a lot like this one someone posted on TikTok, but different branding
Clicky
That is an etirely different system altogether and looks nothing like my system.
Also that bike is a GT.
The GT pipe will not fit the R with it's mid mounted footrests.
The first pipe that I built was on a GT, I had to completely redesign the pipe to suit the R.

1749254041892.jpeg
 
Last edited:
As promised here is a video with the exhaust.


Here is a better picture of the O2 sensor. Can't tell from the picture but there is about a 1 - 2 mm clearance around it.
1748955782667.png



And another shot of the new versus old manifolds. Take a close look because the black is not all open port, just the smaller ring is open. The stock header also has a much sharper bend from the head than the Viking exhaust which has a much gentler radius.
1748955903829.png

I've since altered the postion of the O2 sensor for far more clearance.
 
Bummer, I have the midmount pegs on my GT. Will you be doing an R version Paul
As mentioned above, I first built the pipe on the GT, but then found that it was not compatable with the R footrests.
The GT pipe would physically bolt on no problem but there was no room for your right foot !
So I completely redesigned the pipe to fit the R, this pipe will fit both the R and the GT.
So your GT with the R footrests won't be a problem at all.
 
Back
Top