Lower air deflectors

transalpian said:

That's them, but $0.50 says they won't have them if you call.

I made mine based on the pattern so gratiously provided above. I was able to go bigger in nearly every direction due to the mounting hardware I used. I put holes in mine for turnsignal clearance, but wouldn't do that again. Not really needed and I really stink at free-hand cutting a circle.

All in, I spent about $50 for mine, $12 of which was for a package of 5/8" stainless fender washers, my local fastenall wouldn't sell me just 4...

Click to expand...

transalpian said:

That's them, but $0.50 says they won't have them if you call.

I made mine based on the pattern so gratiously provided above. I was able to go bigger in nearly every direction due to the mounting hardware I used. I put holes in mine for turnsignal clearance, but wouldn't do that again. Not really needed and I really stink at free-hand cutting a circle.

All in, I spent about $50 for mine, $12 of which was for a package of 5/8" stainless fender washers, my local fastenall wouldn't sell me just 4...

Click to expand...

BDKcoyote said:

Could you post some photos please.

Click to expand...

transalpian said:

I'm slow, but I'm....slow.



I didn't do the best job cutting the circle into the lexan. If I do it again, I could get away with a much smaller hole, if not no hole at all. BUT they work!

I should mention I used galvanized conduit hangers as mounting points to the forks. Like the hole cutting, not the prettiest, but incredibly functional. If I run into a set of Triumph fixing hardware (that doesn't cost $90), I'll probably replace them.

Click to expand...

Rocket Scientist said:

Just for record, Fastenal can kiss my white, pimply, ingrown hair infested ass with their minimum charge bull$hit.

Click to expand...

BDKcoyote said:

Thanks for the info but the photo isn't displaying.

Click to expand...