Dyno today

[Mittzy]

Mittzy,

What air filters are you running?

bob

The smaller K&N's (2780 i think)
my graph does not look like anyone elses?????
I dont really know how to interpret this one???

 

[Neville Lush]

I bet your graph was done with the bike held at WOT under load, then the load released. Same engine will do different shaped torque graphs. max figure will be the same, just the low end of the graph looks better as the motor/airflow is already stabilized when the run is started. this is another reason why folk should not get too hung up on graphs. The bike rides well doesn't it? It will, Fred is a good operator.Cheers

 

[Mittzy]

I bet your graph was done with the bike held at WOT under load, then the load released. Same engine will do different shaped torque graphs. max figure will be the same, just the low end of the graph looks better as the motor/airflow is already stabilized when the run is started. this is another reason why folk should not get too hung up on graphs. The bike rides well doesn't it? It will, Fred is a good operator.Cheers

Hi Nev,
The bike runs very nicely and I am very happy. Thank You...
Fred is indeed a great guy and a great tuner and I would recommend him to anyone....
I've never done so many wheel stands and breaking tyre traction as effortlessly as my R3R does now..... My poor tyre
I wish I could afford to send it down to you for the full treatment...

 

[zenbiker]

2007 Classic, Carpentered with under tank air filter and Jars: Higher HP and TQ are with no air filter.
Using the filter gives up 11 HP and 11 ft/lbs torque

http://imageshack.us/photo/my-images/845/drjoe.jpg/

Uploaded with ImageShack.us

 

[dougl]

Hi Nev,
The bike runs very nicely and I am very happy. Thank You...
Fred is indeed a great guy and a great tuner and I would recommend him to anyone....
I've never done so many wheel stands and breaking tyre traction as effortlessly as my R3R does now..... My poor tyre
I wish I could afford to send it down to you for the full treatment...

2007 Classic, Carpentered with under tank air filter and Jars: Higher HP and TQ are with no air filter.
Using the filter gives up 11 HP and 11 ft/lbs torque

http://imageshack.us/photo/my-images/845/drjoe.jpg/

Uploaded with ImageShack.us

That's amazing. Did they suggest triple filters? What filters do they have on their dragster? How does it run around town, like 20-50 mph?

 

[RocketandRollit]

Which Carpenter package and how much?
I'm on the fence....

 

[1olbull]

That definitely looks like Nels' trailer. He's an awesome tuner. I have the good fortune of only being 10 miles from his main location. He tuned my Yamaha Warrior but not the Rocket yet. Nels will be my first stop once I get the Rocket back on the road.

Hey,
This Nels fellow sounds pretty good.
Where in WA is he actually located and how do I make contact.
Best Regards,
1olbull

 

[Torque addict]

Hey,
This Nels fellow sounds pretty good.
Where in WA is he actually located and how do I make contact.
Best Regards,
1olbull

He's in Woodinville. Contact info here: http://2wheeldynoworks.wordpress.com/contact-information/

I notice your locataion says Tacoma. Note where it says he also tunes with Redline Motorsports in Tacoma. I'd ask him about that.