Batch of Custom Handlebars

[WyldCFH]

I'm seriously considering an F6B this fall but I have to be patient as there are lots of rumors floating around for a completely new ground up F6B and GoldWing for 2018. Different motor, 6 speed or their DCT tranny, better nav system etc. etc. You know how rumors are. That being said I will wait and see.

I'll have to look into some of the rumors

 

[barbagris]

Has any one installed ape hangers or larger bars than standard , if so what is the best style that suits the rocket . Cheers

@BigNorm is your man.

I have slightly raised bars - KhromeWerks Wide Sweeper 2+2. On a Standard/Roadster you will need Touring throttle cables and 4" overlength Clutch cable. The bars will also need extending by 2" each side. I am 5'8" and they are spot on. tbh I'd prefer a bit narrower - as the Barkbusters now catch a bit of wind but other than a custom bend I can see no way around it.

 

[barbagris]

I'm seriously considering an F6B this fall but I have to be patient as there are lots of rumors floating around for a completely new ground up F6B and GoldWing for 2018. Different motor, 6 speed or their DCT tranny, better nav system etc. etc. You know how rumors are. That being said I will wait and see.

The DCT on a Wing makes sense. It makes sense on just about all cruisers. So does a Diesel engine.

 

[BigNorm]

@BigNorm is your man.

I have slightly raised bars - KhromeWerks Wide Sweeper 2+2. On a Standard/Roadster you will need Touring throttle cables and 4" overlength Clutch cable. The bars will also need extending by 2" each side. I am 5'8" and they are spot on. tbh I'd prefer a bit narrower - as the Barkbusters now catch a bit of wind but other than a custom bend I can see no way around it.

I put 7" risers on and the stock touring bars up top.

 

[BigNorm]

 

[jake shaw]

I made a couple of sets from 6061-T6 aluminum a few years ago, when I had Access to a CNC Machining Centre. the Gold coloured are 9" rise 7 the Red are 6". The risers where machined from 4" x 1" billet and the round was 1" solid bar, press fitted together. Excuse the junk in the background

 

[BigNorm]

Those would work nice

 

[BigNorm]

Are these for sale?

 

[Ishrub]

Pity about the side profile shot, you just spoiled my delusion that you were just taller than the average Norm.
Now I know your more like the Aussie Norm and me!

YouTube

YouTube

YouTube

 

[barbagris]

I made a couple of sets from 6061-T6 aluminum a few years ago, when I had Access to a CNC Machining Centre. the Gold coloured are 9" rise 7 the Red are 6". The risers where machined from 4" x 1" billet and the round was 1" solid bar, press fitted together. Excuse the junk in the background

Those look like some of the earlier Heli-Bars - Interesting - I did find something similar on ebay but only in 7/8 aimed at Chines 125cc bikes. Fully adjustable. Not the same rise etc naturally.