r3t

Hangin' out @ The Quaker Steak & Lube

want to know if anyone here knows a better way to change the rear tire on the r3t than the manuel says im gonna try to change it myself any info will be greatly appreciated thanks

I have uploaded a pic of the connector with the contacts pulled. In my 2008 Touring, it appears the wire is RED not PINK. The only other posibility is that I used the wrong connector. In the picture is a 3-pos triangular connector. It has a solid PINK wire that lines up with a Blk/Yel wire...

Just mounted to the Bars with the provided velcro strips.

Just mounted to the Bars with the provided velcro strips.

Just mounted to the Bars with the provided velcro strips.

Fairing for Rocket III Touring (R3T) According to Corbin, they apparently think their Fleetliner Fairing will work with the Triumph OEM 4.5" aux lamps. I had to straighten out their rep (via email) Sergio that the aux lamps he referenced was for the non Touring model. I also inquired about a...

has any one installed the Thunderbike bars on a Rocket 3 Touring???Will they work??Link Removed thanks.

Hi, New forum member here. Does anyone have a tune for a all stock R3T? I'll be adding slip-ons and individual filters later this year and will then have it Dyno Tuned by Piper Performance in Fort Worth, TX. Cliff looked at the TuneBoy documentation and say he won't have any issues working...

I bought this one new in March of 08 and by the time I added accessories I had spent 20k on it. I have the original and touring windshield. Also have the accessory pipes and original mufflers. I added the sissy bar with the large pad, triumph sissy bar bag, fog lights and visors. The bike...

I'm installing J&M speakers on my R3T and the installation is easy enough except for connection to a "switchable" power source on the bike. I've also installed the auxilliary lights so that connection is taken. Any suggestions how to make this switchable connection would be appreciated.

I've searched the posts here that reference removing (lifting) the tank. They said to remove the "allen head bolt" under the "gauges". However, I removed the bear claw with the display and there is no allen head bolt (or any other bolts). There are however, two Torx head screws, one on each...

I have modified the R3T to get back most or all of the power I had on the Classic. Now I keep getting warned by others to be careful of the rear tire as the 180 isn't rated for the speeds that the 240 is. My question is, if you are just a reasonable rider who likes more get-up-and-go off the...

I have the standard Metz tires and don't seem to be able to find out what tire pressure I should be running. I probably should know, but I can't seem to be able to find the information right now. Thanks!! :eek:

Corbin Fleetliner fairing, Scootworks trunk with Mustang backrest mounted on Wompus Rack. Truimph aux lights and highway bars.

Corbin Fleetliner fairing, Truimph aux lights and highway bars.

Scootworks trunk with Radiantz LED run/turn/brake lights mounted on Wompus Rack. Bottom 4 LEDs are run/brake. Top 2 are turn only.

Corbin Fleetliner fairing, Scootworks trunk with Mustang backrest mounted on Wompus Rack.

Anyone of you R3T owners have any problems with the ignition switch. Had a problem with mine on the Classic (fixed under warranty) and know of a few others who have had problems...just wanted to know if the switch is different? Dennis

I've been trying to find out if any of our Rocket captains have replaced the handlebars on the R3T. And if so, with what. I've already put the Rivco risers on and tilted the stock bars as far down as they'll go. I still find the bars just about 2 inches too far away from my 'natural'...