Hi Guys I have a 2007 Rocket with black Predators but didn't get heat shields from previous owner. I attempted to PM Travelguy with no response. Can anyone assist me in how I might get some? My right leg and my girlfriends will thank you in advance:) !
So help me out here guys. I'm going to drop some coin on a R3 Roadster when I get back and I'm trying to decide between the Non-ABS/ABS variants (which I read to be the 2009/2010 models respectively). The reason for this dilemma is because I want to fit one of the zard systems to the bike and I...
i have to congratulate jared on taking on relocating the master with nothing to go by.. just moving that i think really cleaned up the look of the bike.. utah'in do it yourselfism at it's finest.
Hi everyone. This is my first day on the site. Last year I bought a rocket 3 roadster and after about 5000 miles decided that I am interested in upgrading the exhaust system. I was wondering if there were any preferences, and I heard a rumor that zard is comming out with a 3-1 for the...
:confused:Have just received the chrome Exh.flange covers for my new 2011 Roadster. Look good, but before I start, any words of advice on istallation of these, or things to watch out for? I don't want to muck anything up! Should I put on one at a time, or all 3 at once? Any point in using...
Are any of you running the D&D's or know a fellow Rocket owner that is or has run them? Just curious but I am interested in performance, construction (welds) , chrome quality, etc. May change from the TORS if I don't get negative feedback. If I do, TORS spoken for by Gr3ywolf a long time ago.
When I got my R3 about 6 weeks ago it had a huge muffler on it from a Yamaha Warrior. Nice and quite but lots of back pressure , and looked like a small water heater. The previous owner had installed it to get rid of some loud drag looking pipes.
I installed a super trap Universal .24 inch...
Thinking about going back to the standard exhast system from the TORS, question is should I get the standard tune 20222 (I think!) put back into the ECU, I have the TORS tune atm 20226; I intend to keep the Cat delete fitted?
I am also on a forum for Honda cruisers (shadows) and a lot of guys on that forum will do what is known as a "hole saw mod" or "rebar mod".
What this is is drilling out the baffles or punching a hole or 2 into the baffles with a long length of sharpened rebar.
It gives the bike more rumble and...
Well I had posted about an exhaust leak where the header meets the cat. bypass. Since I really didn't want to tear the whole system apart, I figured I'de just try to tighten the clamp. The existing clamp was bottomed out and still leaking so I went to try and find a slightly smaller one at a...
Exhaust leak?
I got up this morning with the intention of fixing an exhaust leak I noticed the other day with some RTV silicone. It's where the header collector meets the cat by-pass. After taking the heat covers off it looks like I'll need to take the whole exhaust system apart from the header...
Okay, so I've decided on used R3 Touring model and if all goes well I should be getting one in a couple of weeks (Yeeehaaa...chomping at the bit!!!). Before I go all in and do this... I have a question about the exhaust sound.
Of all the downside features of the R3 (Touring or otherwise) for...
Looking to go into this direction - think I'll be running into problems with a custom setup?
North Jersey Customs
That's the only shop around here that seems appropriate for that kind of work....
Let me know what you guys think - I would really like to get into header work and a new exhaust -...
I've seen many different mods for the R3's......3 into 2 etc.etc.
Has anyone seen a 3 into 4 mod?? Could be an interesting sound especially with a cat eliminator!