TuneECU wanted de-cat mod pipes 3 k&n

[GavinHooper-Newton]

Looking for a credited tuneECU for my 08R3T de-cat (thanks Paul Bryant) and drilled baffle OEM pipes, air box delete 3 x k&n2780. Assuming my pipes are similar to jardines or tors - sadly still stock headers. Thinking of using 20235 - any recommendations please.
TIA. Gav from New Zealand

 

[atomsplitter]

Looking for a credited tuneECU for my 08R3T de-cat (thanks Paul Bryant) and drilled baffle OEM pipes, air box delete 3 x k&n2780. Assuming my pipes are similar to jardines or tors - sadly still stock headers. Thinking of using 20235 - any recommendations please.
TIA. Gav from New Zealand

TuneECU lists tunes by VIN range so it would helpful to know the last 6 of your VIN and the base map currently in the ECU.

 

[GavinHooper-Newton]

TuneECU lists tunes by VIN range so it would helpful to know the last 6 of your VIN and the base map currently in the ECU.

337889 and on a OEM base map at present.. Have all the parts cables etc haven't built yet tune is the last piece needed and really want a second opinion on that.

 

[GavinHooper-Newton]

Update. Going to go with 20368 Nels tune TORs Ramair by Power-tripp. Good baseline before dyno anyways!

 

[atomsplitter]

Update. Going to go with 20368 Nels tune TORs Ramair by Power-tripp. Good baseline before dyno anyways!

You'll know if it isn't a compatible tune, the bike will not start.

 

[GavinHooper-Newton]

You'll know if it isn't a compatible tune, the bike will not start.

Should that worry me - fist time remapping!! At least the map is listed under touring in the tuneECU maps. And the map is recommended in other forums...

 

[atomsplitter]

Should that worry me - fist time remapping!! At least the map is listed under touring in the tuneECU maps. And the map is recommended in other forums...

Not really. You can always load the base map back in and Bob's you're uncle.

 

[r3badboy]

You'll know if it isn't a compatible tune, the bike will not start.

You can always copy & paste a tune that's not compatible but has same setup your bike is running. I have done this on a couple of mine.
Copy map values from a map you like, open your original map & paste. Save map. Check devices & untick or tick what you want. Save again & then download to ecu.

 

[Kene]

TuneECU lists tunes by VIN range so it would helpful to know the last 6 of your VIN and the base map currently in the ECU.

HI did you cut open the ends to remove cat, and

Looking for a credited tuneECU for my 08R3T de-cat (thanks Paul Bryant) and drilled baffle OEM pipes, air box delete 3 x k&n2780. Assuming my pipes are similar to jardines or tors - sadly still stock headers. Thinking of using 20235 - any recommendations please.
TIA. Gav from New Zealand

Hi did you cut open exhaust ends to clear cat out , re weld ? Thanks Kene

 

[GavinHooper-Newton]

HI did you cut open the ends to remove cat, and

Hi did you cut open exhaust ends to clear cat out , re weld ? Thanks Kene

Paul Bryant from Viking exhausts did it for me. He cut the engine side ends of pulled out the cats then rewelded. See images