Claviger
Aspiring Student
- Joined
- Jul 25, 2014
- Messages
- 6,934
- Location
- Olympia Washington
- Ride
- '21 Z H2, '14 R3R, '02 Daytona 955i
Oh, I already measures center of stem to one of the bolt hole centers, it’s 5mm or 43mm offset depending which hole you measure from.
So when drilling the L bracket hole, measure from one of the clamp mount M8 screws forward by the mounting measurement of the damper then add 5 mm and drill the hole. I’ll take pics when I do it to show, but basically you just need to measure stem center point on damper to mounting hole center distance and add 5 to ensure proper alignment.
Hope this works as I think it will, if so it’ll be a $50 mounting system for rockets.
So when drilling the L bracket hole, measure from one of the clamp mount M8 screws forward by the mounting measurement of the damper then add 5 mm and drill the hole. I’ll take pics when I do it to show, but basically you just need to measure stem center point on damper to mounting hole center distance and add 5 to ensure proper alignment.
Hope this works as I think it will, if so it’ll be a $50 mounting system for rockets.
Last edited: