Hi guys, just a quick up date on my black lady. After a couple of phone calls with HansO, two extra modified program and a lot of chrome hair, I ended up removing my secondary tps as the butterflies just sat proud with ignition on(but volts were spot on).. now I checked it an it was spring loaded and if I fitted it as per the manual, the volts were up in the 4's; so after some engineering brainstorming, I went the opposite way with butterflies open so when you closed them the tps was at the zero spot. I then did all the normal resets and wallah, bike was idling normal and no hesitation on the road. I then downloaded another one of HansO's programs, the same as most have but -44 decal (same resets again) and the bike is purring. I haven't replaced anything but will be ordering an new primary tps for the tool kit.
Today I removed the secondary butterflies and what can I say. I hope this little vid can be uploaded.
Thank you again for everyone's help, and if there is any questions, I am more than willing to help.
Thanks Triumph Australia for the headache
Muff