Woohoo. Yippee. Crack a big Woody and all that other crap.
I've fixed it and it's running like a dream.
Went back out this morning and had another play.
I was reading an article from a link in TuneECU about testing the TPS and ISC.
Followed it thru the steps and checked the voltages and stuff.
TPS read .59v Stepper motor was at .69 which was the bottom scale of accepable so I didn't much with it.
It then went and automatically did the TPS reset thing and I then disconnected it and went to do the auto tune as well.
As soon as I hit the starter I knew there was an improvement. The bike ran straight up to about 2000RPM then quickly settled back down to around 1200 to 1000.
Left it be for 10 to 15 minutes till the thermo kicked in then turned it off.
15 minutes I took it out for a ride. at the first corner it did a big backfire which was a bit dissapointing, but then road out onto the main road and did about a 25K loop back to home.
Not one backfire after that. Not even when pushing hard then shutting the throttle right off.
Absolutely brilliant. It is the best the bike has ran since I got it. Perfect.
I am soooo wrapped.
Was going to go back in to TuneECU and write a thank you and a donation to Alain for what he's done but I seem to be having a problem getting back into his site.
Keeps coming up with a message saying.
Forbidden
You don't have permission to access / on this server.
Apache Server at
TuneECU_Start Port 80
Hope I haven't broken any site rules or something. I never found a registery key anywhere and just assumed it did a self register or something cos it all worked just fine up till an hour ago. Might have to look into that.
Anyway. A huge thanks to all who made this work so well. Did I say I'm impressed
If not, I am.