Shifting - recommended revs

[Martin_z_BA]

Hello, I have brand new R3GT.
I would like to ask you, what are recommended revs for shifting. 1 to 2, 2 to 3, etc, or, 5 to 4, 4 to 3, 3 to 2....
I am curious for my break in period and also for normal riding.
Next question is: On which gear do you ride in city? What are usual revs? Before I had Intruder 800 (C50), what is completely different engine. 3000 RPM sounds to me too much
If it possible, please answer in metric units
Thank to all for help and answers.

 

[pica]

I guess it depends in what city....
small towns? most times I find myself in 2nd gear and looking for an escape...
changing gears? whatever keeps the bike happy, usually between 3000 to 4000rpm.

 

[Journeyman]

Agree. About 3500 rpm’s generally, although the bike is probably fine cruising at 4,000 to 4,200.

 

[jackrotten]

I shift at 3-3.5k depending on where I'm riding and 5k-ish when "racing"

 

[Guffer]

Like any bike (or car for that matter), just feel how the engine’s reacting at whatever revs/gears it’s in. If it’s juddering at too high a gear and too low revs, either change down or give it more throttle. If it’s screaming it’s nuts off, change up. Simple.

 

[gadget_ho]

The sticker on the tank tells you rev limits by km/miles travelled during the breakin period...

 

[Dr.D]

I think this motor feels and sounds comfortable cruising at around 3000 rpm. 2000 is a bit low and labored and above 4000 starts to feel a bit buzzy. When riding aggressively I hit the redline in every gear.

 

[Martin_z_BA]

The sticker on the tank tells you rev limits by km/miles travelled during the breakin period...

yes, but i asked for shifting, not for limits.

 

[Martin_z_BA]

Like any bike (or car for that matter), just feel how the engine’s reacting at whatever revs/gears it’s in. If it’s juddering at too high a gear and too low revs, either change down or give it more throttle. If it’s screaming it’s nuts off, change up. Simple.

as i wrote, i have intruder 800 and it works on much lower revs. also the sound is different. therefore i asked. i am not used to such a sound and such a speed, 3000 seems too much to me... i understand, new bike, new habits, byut is better to ask than destroy the engine.

 

[Martin_z_BA]

thanks to all for replies and help.