Plenum wanted

[Battersea]

I've melted bitumen sheeting onto the inside of my bearclaw in an attempt to lessen the induction noise ... it did help.

I just did mine last night.

I put the bearclaw on this morning with the sound deadening in it, Kicked it in the guts and I am happy with the induction noise reduction, It works well

Ta very much, all registered in my memory bank for future reference.

Taking the bike to a aftermarket filter manufacturer tomorrow, they have offered to provide r&d and possibly put into production if something viable can be put together.

 

[barbagris]

I'll be using this

Vibration Annihilation --- Thermal Velocity | Hi-Performance Exhaust Wraps and Heat Shields - Made in Manchester, UK

for sound deadening

and this

Reflective Heat Shield --- Thermal Velocity | Hi-Performance Exhaust Wraps and Heat Shields - Made in Manchester, UK

for heat reflection - I've found that with triple K&N's the tank gets hotter. Especially once parked after a run.

Have fun at RAMAIR that man!

 

[TOMCAT]

Thanks for that .. makes the melted bitumen look a bit stoneage

 

[barbagris]

Thanks for that .. makes the melted bitumen look a bit stoneage

I was going to say Antipodean - but whatever you're more comfortable with

I do feel it my duty to point these motherland options out to other members of the Commonwealth. The Acousta-fil silencer filler they make is supposedly very good too.

 

[TOMCAT]

I was going to say Antipodean - but whatever you're more comfortable with

I do feel it my duty to point these motherland options out to other members of the Commonwealth. The Acousta-fil silencer filler they make is supposedly very good too.

You could say Antipodean .. but you'd have to explain what it meant

 

[mr hunt]

You could say Antipodean .. but you'd have to explain what it meant

I think he's implying all Australians are knuckle draggers...get him boys!!

 

[barbagris]

I think he's implying all Australians are knuckle draggers...get him boys!!

Knuckle draggers - Hardly. That'd mean they can walk upright

Mr TOMCAT - I've just received a "Plastic moulded part" from the Antipodes - Thank you.

Off to clean the marsupial doo-doo away and get the slitting saw ready.
Hose clamps too - very grateful. :bch:

Have a shiny lined and rubber trimmed claw and a bit of proofing under the tank.
Any further forward under the tank and it was visible.

 

[CanberraR3]

I have no sucking noise - not that the sound of the triples particularly bothered me in any case.

 

[bruce aussie]

The sound of triplets sucking probably wouldn't worry me either. Ah sorry I missread that I was thinkin blonde sisters. Jim is getting to me.

 

[69birdflu]

Great idea!

Knuckle draggers - Hardly. That'd mean they can walk upright

Mr TOMCAT - I've just received a "Plastic moulded part" from the Antipodes - Thank you.

Off to clean the marsupial doo-doo away and get the slitting saw ready.
Hose clamps too - very grateful. :bch:

Have a shiny lined and rubber trimmed claw and a bit of proofing under the tank.
Any further forward under the tank and it was visible.

Now that's a great idea! Hope you don't mind I copied it. I used the extra Dynamat that I used in my car. Guess I gotta go for a long ride, just to make sure it works. Thanks Barbagris