Need information, A measuring tape, some time, and the 2004-2009 Rocket III. (Added photos of cats!)

[oteczdmitriy]

I have a 2007 triumph rocket 3 classic tourer that have the crash bars so used a different way mine has a silver motor with floor boards. Anyway the way I measured from the tab on the front of motor to the center of axle it was 20 15/16 inches
From a tab on the front of motor to center of axle
Hth not a problem for a bro

Thank you, I really appreciate it!

 

[r3badboy]

Thank you, I really appreciate it!

Did some rough measurements on 4 of mine 2x06 1x05 ( one even has a 16 Roadster engine in a classic frame) & they all appear the same. Will get back with more accurate tomorrow

 

[oteczdmitriy]

Did some rough measurements on 4 of mine 2x06 1x05 ( one even has a 16 Roadster engine in a classic frame) & they all appear the same. Will get back with more accurate tomorrow

The more measurements there are, the more accurate the statistics will be. I'm looking forward to it.

 

[Bunny Burrell]

Well, I'm still ready to find out the measurements from the front rail bolt to the front wheel axle on the 2004 to 2009 Rocket.

As promised, just measured mine. From the front Crash bar mount to centre of the front spindle 21&5/8 inches or as Triumph is metric nowadays 548mm. Hope that’s of some help.
Now playing around with the black art!

 

[oteczdmitriy]

As promised, just measured mine. From the front Crash bar mount to centre of the front spindle 21&5/8 inches or as Triumph is metric nowadays 548mm. Hope that’s of some help.
Now playing around with the black art!

Thank you. And good luck!