Need information, A measuring tape, some time, and the 2004-2009 Rocket III. (Added photos of cats!)

TURBO200R4 said:

I have a 2007 triumph rocket 3 classic tourer that have the crash bars so used a different way mine has a silver motor with floor boards. Anyway the way I measured from the tab on the front of motor to the center of axle it was 20 15/16 inches
From a tab on the front of motor to center of axle
Hth not a problem for a bro

Click to expand...

oteczdmitriy said:

Thank you, I really appreciate it!

Click to expand...

r3badboy said:

Did some rough measurements on 4 of mine 2x06 1x05 ( one even has a 16 Roadster engine in a classic frame) & they all appear the same. Will get back with more accurate tomorrow

Click to expand...

oteczdmitriy said:

Well, I'm still ready to find out the measurements from the front rail bolt to the front wheel axle on the 2004 to 2009 Rocket.

Click to expand...

Bunny Burrell said:

As promised, just measured mine. From the front Crash bar mount to centre of the front spindle 21&5/8 inches or as Triumph is metric nowadays 548mm. Hope that’s of some help.
Now playing around with the black art!

Click to expand...