lowering passenger boards

[jkm789]

Howdy:
Looking to buy my first Rocket 3 Touring. Took one for a ride and am hooked. However, my wife found the passenger seating a tad cramped (long legs). Checked on line but could not find any floorboard lowering kit for Touring model. Any suggestions - other than a new bike and shorter wife?
Thanks.

 

[Scorp]

I have an R3 Classic which has added running boards for passenger. The previous owner had added them and he and his wife were tall so he also added extensions so the running boards sit further forward.

 

[Dennsell]

Welcome to the site..
I used these to move the boards forward not sure if they lower tho'

Optional Relocation Arms For The Triumph® Rocket III - Triumph Performance Parts Australia

 

[Scorp]

Thats what are on mine also.

 

[CanberraR3]

Says they're not for the Touring. Do you know if they do them for the Touring?
Also, can they be used with pegs?

 

[Dennsell]

Says they're not for the Touring. Do you know if they do them for the Touring?
Also, can they be used with pegs?

The relocation arms move the passenger boards forward 4” gaining much needed leg room as well as allowing the passenger to have a more relaxed riding position.
The arms have 2 different height adjustments.
When saddlebags are installed there is little or no room between the passengers heel and the saddlebag, but RIVCO relocation arms solve that problem.
Please NOTE: TR3005-5 Passenger Floorboard Relocation Arms will not fit the Rocket Tourer.
These relocation arms will only work with RIVCO Boards.

They can't be used with Pegs, too close to chrome trim for mount nut and long stud.. Not sure about touring maybe Email enquiry..

 

[slidderhd]

fabricate

This what I love about this forum. No one has done it yet, but there are some talented Machinists on here that can make anything. I can't wait to see what someone comes up with for this.

 

[Wooof]

Order the relocation arms

I have ordered a set of Rivco relocation arms for my Roadster. Wife prefers the pegs so i am going to make them fit.

I'll let all know how it goes and add pics if required if any alteration is required.

Cheers

The relocation arms move the passenger boards forward 4” gaining much needed leg room as well as allowing the passenger to have a more relaxed riding position.
The arms have 2 different height adjustments.
When saddlebags are installed there is little or no room between the passengers heel and the saddlebag, but RIVCO relocation arms solve that problem.
Please NOTE: TR3005-5 Passenger Floorboard Relocation Arms will not fit the Rocket Tourer.
These relocation arms will only work with RIVCO Boards.

They can't be used with Pegs, too close to chrome trim for mount nut and long stud.. Not sure about touring maybe Email enquiry..

 

[warp9.9]

Can one of you R3T owner send me soem pictures of the passenger floor board set up on the bike? Different views and with them up and down. I have a milling machine and you never know I might be abke to figure something out.
My e-mail address is

szczepaniak@grics.net