Installation of Neville Lush Racing "street" cams in 2014 Rocket III Touring

[Paul Bryant]

The 25mm shims work well with cams, that give you about 200 rwhp.
So pobably not that much to worry about.

I'm jealous, you have great toys and get to play with them like this

 

[Steel]

Where does this cam make its power?

The back tire.

 

[BigNorm]

Right where it's supposed to.

I used to study the Harley cams up and down. Since we have only a few choices it would be nice to know what the specs are.

 

[Paul Bryant]

I used to study the Harley cams up and down. Since we have only a few choices it would be nice to know what the specs are.

Flat, up, bump, drop, round, flat .......

 

[Neville Lush]

The 25mm shims work well with cams, that give you about 200 rwhp.
So probably not that much to worry about.

Ulf Penner is correct. Up to .400" the shim over is fine , although springs are needed over .380".

 

[Claviger]

I used to study the Harley cams up and down. Since we have only a few choices it would be nice to know what the specs are.

I agree, though, it seems specs are kept fairly close to the chest. If I ever have my head of my rocket, the cams are going out to get measured.

 

[BigNorm]

I agree, though, it seems specs are kept fairly close to the chest. If I ever have my head of my rocket, the cams are going out to get measured.

It seems many are making a joke of it. I guess if it were that important to me I could make my own measurements.

 

[Claviger]

What I can say, is the highest lift I've ever seen quoted as viable is 0.465", and that's using custom tappets, though, I suspect @Trirocket3 may have even bigger than that in his monster.

 

[barbagris]

I'm jealous, you have great toys and get to play with them like this

I do like his play room - but then I suspect the Bryant play room is full of goodies too. Now If I can just get you all to come and live close to me - then that would be just lovely.

 

[Penner]

I have fitted Neville Lush cams two or three times.
Good price and craftsmanship. And they even got a good working coating.
You can put them in just as stock cams. For the advanced user I would recommend slotted cam sprockets.
With any tuning camshaft it depends on intake, exhaust and compression ratio which lobe centers work best.