R3T derestricting

Hey folks, been scouring through a variety of threads as I put my 2009 R3T back together, looking for insight with TuneECU maps that I may not have seen. Seems like the most common maps guys and gals are using is the Nels or PowerTripp, would you all recommend those for my 09 R3T with Ramair, EVAP removed, stock pipes?

Thanks in advance,
Matt

** Also, to confirm, the 12 minute "relearn" isn't necessary after uploading a map correct?

I reposted the original 2013 tune to Resources. Had it saved with some PAR2 recovery files to verify its checksum and integrity. To the best of my knowledge the file is intact. Whether or not it's the best tune to run still I don't know, but has worked well for me for years. I read something about a file there but corrupted; this is 99.99% certain to be as initially posted, feel free to run a parity check, I included the par2 files.

Another long absent "old head" returns
My O My!

1olbull said:

Another long absent "old head" returns
My O My!

Click to expand...

Aarh ... a semblance of homeostatic balance appears to have returned to the forum as the 'righties' and 'lefties' return from long absences!

Finland has joined NATO since we last saw @cr0ft too!

Good to see your still kicking @cr0ft

Hi you all.
Thank you all very much.
I bought a bine stock r3t 2013 with 42000 km 2 weeks ago. When i did a test ride it was vibrating horrible in accelerating and decelerating and i asked te seller if it would be ok to take it to a dealer to check a day later. That was ok so the day after i got the bike and drove to the dealer. On my way there the bike was running smoother already and the dealer said it was running like it a has to, so i bought the bike.
After 3 days it started stalling at deceleration a few times when i engaged the clutch and had a bad low idle sometimes.
I decided to clean the crank sensor and trotlebody, put some fuel injector cleaner in the tank but that didn't help a lot. Stil stalling over time and bad idle.
So i searched the internet and came to this forum post and read it from the beginning al to to the end.
I decided because al i found out here to order a lonelec kkl cable from the uk and got myself ecutune on my phone .
Reading al the posts here i tought the tune from Power-trip,

https://tuneecu.net/Tunes_in_Hex_an...t/Rocket III Touring/R3T_stock_or_slip-on.zip

would be my best option and so i started to remap the bike ( little excited because i didn't thing like that before and i,m not a technician) Well guy's, after saving my current 20367 map i loaded in Power-trips map and it worked well. The only thing i forgot was to put the fuse back in after reset adaptions before starting so the bike would not crank. . But glad found that out quick and let the bike idle for 15 minutes and turned it off.
I did a long test ride after and did also a lot of slow speed handling an all i can say is WOW.. It runs perfectly and smooth. I'm glad i found this forum and thanks everyone for sharing their knowledge here.
Big thanks to you all.

Best Regards. Martin from Rotterdam in the Netherlands.