Rocket science

[cusso ken]

They do look good wish i had a spare $1000 or so laying around , I will start collecting cans for recycling and save up

$ 1000 is a Bargain (I think it would be dearer than that) I just was quoted $1250 for a set of Staintune's ( Cans only) still waiting for Quote for TORS from Brisons Newcastle ,Old Mate Dennis Foran has quoted around the $1500 mark ,but he does a nice job ,but I like the ones here , actually I saw and heard A black R3 Roadster today at Lakehaven Shopping Centre NSW with a single alloy can it looked like one of those universal cans you buy from motor cycle accessory shops ,it sounded sweet as, no cat just an after market can ,he left before I could get on his ear about it (anyone here?)

 

[1olbull]

$ 1000 is a Bargain (I think it would be dearer than that) I just was quoted $1250 for a set of Staintune's ( Cans only) still waiting for Quote for TORS from Brisons Newcastle ,Old Mate Dennis Foran has quoted around the $1500 mark ,but he does a nice job ,but I like the ones here , actually I saw and heard A black R3 Roadster today at Lakehaven Shopping Centre NSW with a single alloy can it looked like one of those universal cans you buy from motor cycle accessory shops ,it sounded sweet as, no cat just an after market can ,he left before I could get on his ear about it (anyone here?)

cusso ken akaSuperBloke,
I have run mine into a single can that sounds perfect - not to loud & not too quiet.
it is a DE Sports.

 

[ozrider]

$ 1000 is a Bargain (I think it would be dearer than that) I just was quoted $1250 for a set of Staintune's ( Cans only) still waiting for Quote for TORS from Brisons Newcastle ,Old Mate Dennis Foran has quoted around the $1500 mark ,but he does a nice job ,but I like the ones here , actually I saw and heard A black R3 Roadster today at Lakehaven Shopping Centre NSW with a single alloy can it looked like one of those universal cans you buy from motor cycle accessory shops ,it sounded sweet as, no cat just an after market can ,he left before I could get on his ear about it (anyone here?)

Went for a run with bruce aussie last weekend and his has a sweet note with the single can,
The headers are $1350.00 inc GST that includes the ceramic coating.

 

[CanberraR3]

What can izzat attached to the header?
Sure looks good!
Even better without that "RED" paint!

They're the Foran pipes I've had on for a while now. One each side. Fitted straight up. I opted for the "stock" sized outlet so I could use the pipes I had. Might loose a smidgeon of hp but the torque is amazing.

They do look good wish i had a spare $1000 or so laying around , I will start collecting cans for recycling and save up

$1389 delivered.

 

[cusso ken]

cusso ken akaSuperBloke,
I have run mine into a single can that sounds perfect - not to loud & not too quiet.
it is a DE Sports.

The single can was just running of a stock header system ,and as I said it sounded nice and smooth ,are you running stock headers or extractors ,I am just checking out all the possibilities the Tuning guy says he can set the tune to reasonably match most exhaust and air intakes for fuel and air management . as mine is a Touring it is in the lower tune settings anyhow!

 

[1olbull]

So far stock headers; but, I am drooling over that new ceramic Aussie header!
Really prefer a 3 into 1 system.

 

[1olbull]

They're the Foran pipes I've had on for a while now. One each side. Fitted straight up. I opted for the "stock" sized outlet so I could use the pipes I had. Might loose a smidgeon of hp but the torque is amazing.



$1389 delivered.

Thank you for the dope, Mate!

 

[bruce aussie]

Thank you for the dope, Mate!

Dope? Where's mine?

 

[TOMCAT]

Hey Bruce .. didn't you do a breakdown on costs of the headers ? Remember how much the flanges alone cost ? Just trying to work out what a set would cost me. Trevor was getting charged $600 for flanges to be made a while back.

 

[bruce aussie]

Hey Bruce .. didn't you do a breakdown on costs of the headers ? Remember how much the flanges alone cost ? Just trying to work out what a set would cost me. Trevor was getting charged $600 for flanges to be made a while back.

No T.C. I wouldn't know. He is getting the plate laser cut somewhere and pressing the oval ports up himself. I think he got the cost down a bit from what Les's cost. The plate makes it easier to keep everything straight and true so it fits up and seals easily.