Risers For 6'2 ?

[cr0ft]

I am 6'3" and didn't like the location or wrist angle of the bars. I added the Rivco Risers and have the bars pulled down to decrease the wrist angle. In the past, I used H-D Softail bars on a H-D Road King to get higher handlebars with more open wrists. Would like to try it on the R3T

I'm not 6.3, but did exactly this too - Rivco risers and bars angled down towards the tank until the wrist angle wasn't as horrible. After years of keyboard work my wrists are sensitive to being cocked at an angle, but the risers solved it. Ideally a little more height with the same wrist angle wouldn't be bad... but I can live with it. At least I'm not leaning forward over the tank on a cruiser anymore.