Replacing rear indicators with LEDs

DEcosse said:
1. Replace Relay
2. Nothing
3. Replace Relay
Click to expand...


So I bought the relay that 1olbull shows in above post - Then bought (2) 1156 BA15S-18-SMD LED Light Bulbs amber, for front (clear lenses) and (2) 1156 BA15S-18-SMD LED Light Bulbs red, for the rear (clear lenses) - The amber and the red bulbs work in the front, neither work in the back, with the CF 13 GL-02 flasher in, but the filament bulbs work in the rear with LED flasher and OEM flasher.
WTF?????

P.S. They were CHEAP bulbs from Ebay ($6.00 per pair vs $20.00 pair @ AutoZone) COULD THAT BE WHY?????
(Yea, I'm a dumb*** sometimes)
 
The incandescents should still work with new relay. Suspect the problem is with the led globes you bought for the rears. Can you test this using one of the working ones from the front and vice versa test the leds for the rears in the front?
FSB
 
FunkSoulBro said:
The incandescents should still work with new relay. Suspect the problem is with the led globes you bought for the rears. Can you test this using one of the working ones from the front and vice versa test the leds for the rears in the front?
FSB
Click to expand...


Yea, all the LED'S work on the front but not the rear - all of the incandescants work on the rear
 
check that the polarity of the wiring is correct for the LED in the rear config
 
+1 polarity issue, the + & - wires on the rear indicators need to be switched for LEDs even though fronts are fine
 
OOOOOOOOOOOOOOOOOOhhhhhhhhhhhhhhhhhhhhh - Thank you DEcosse And R-III-R Turbo..................
Can I say that in the same sentence?????
 
You must log in or register to reply here.

Similar threads

Aftermarket indicators issue
Replies
9
Views
701
ArekDeBoss
Valve adjustment with pistons & head out?
Replies
4
Views
183
Valaas
Rear tire puncture - any emergency advice?
2
Replies
15
Views
1K
cootertwo
Rear ride…..shocks?
Replies
5
Views
661
Tripps
Rear Suspension Sag adjustment
Replies
3
Views
533
1olbull
Menu
Log in
Register