Replacing rear indicators with LEDs

In US get a CF13GL-02 - find on ebay or from superbrightleds.com
Note - the CF13JL-02 is NOT the same thing

I AM SO SORRY!
Something went wrong with the link.
Feel so bad I went out and removed mine for a photo!
Mea-Culpa!
THIS IS the proper link!
CF13-GL02 LED Flasher Relay Fix Hyper Flash Turn Signal Decoder Load Equalizers

CF13GL-02.jpg
 
1. Replace Relay
2. Nothing
3. Replace Relay


So I bought the relay that 1olbull shows in above post - Then bought (2) 1156 BA15S-18-SMD LED Light Bulbs amber, for front (clear lenses) and (2) 1156 BA15S-18-SMD LED Light Bulbs red, for the rear (clear lenses) - The amber and the red bulbs work in the front, neither work in the back, with the CF 13 GL-02 flasher in, but the filament bulbs work in the rear with LED flasher and OEM flasher.
WTF?????

P.S. They were CHEAP bulbs from Ebay ($6.00 per pair vs $20.00 pair @ AutoZone) COULD THAT BE WHY?????
(Yea, I'm a dumb*** sometimes)
 
The incandescents should still work with new relay. Suspect the problem is with the led globes you bought for the rears. Can you test this using one of the working ones from the front and vice versa test the leds for the rears in the front?
FSB
 
The incandescents should still work with new relay. Suspect the problem is with the led globes you bought for the rears. Can you test this using one of the working ones from the front and vice versa test the leds for the rears in the front?
FSB


Yea, all the LED'S work on the front but not the rear - all of the incandescants work on the rear :confused::confused::confused::confused::confused::confused::confused:
 
check that the polarity of the wiring is correct for the LED in the rear config
 
+1 polarity issue, the + & - wires on the rear indicators need to be switched for LEDs even though fronts are fine
 
OOOOOOOOOOOOOOOOOOhhhhhhhhhhhhhhhhhhhhh - Thank you DEcosse And R-III-R Turbo..................
Can I say that in the same sentence????? ;)
 
Back
Top