Hello,
I am looking to replace the stock grips on my 2014 R3R. I have had Kurakyn Isogrips on my other bikes. I would like to use them on the R3R.
Has anyone here used them,and which do I need. I typed my info into their website, and only the chrome ones came up but were listed under the touring model.
Thanks for any help.
sds
Just removed black ISOGRIPS from my Rocket. You don't need anything other than the grips themselves. You'll have to slacken off the throttle cables at the injectors otherwise it's a straight swap over.
I had the grip sliding so I removed the 4 alen screws and drill taped the end cap the handle bar is already threaded .no more issues with grip moving
I used stainless steel screws and i nicked the screw to use it to tap thread into the end cap as the tap point was too long before it would start to tread the hole , you only have 4 mm to work with