Rebuilding the Trike

[Pablouk]

more plumbing work and fitting a high power 2 way solenoid for reverse to remove lever.

 

[Pablouk]

Next job,
I have to fit a small pipe to the thermostat housing from the tank just to make sure the engine is self bleeding.

 

[evanr]

more plumbing work and fitting a high power 2 way solenoid for reverse to remove lever.

Could you give us a little more detail on the solenoid for the reverse. I'm looking to do something for my trike also.

 

[Pablouk]

Could you give us a little more detail on the solenoid for the reverse. I'm looking to do something for my trike also.

It is a friend who gave it to me it pushes and pulls, he has a spare ill ask him if he wants to part with it, I am going to use the light switch from another triumph and insert that into the blank on RH controls with two relays to operate one for reverse the rh position on switch the middle to engage forwards and the right position to de energise both relays as the reverse box is lightly spring loaded to remain in forwards position.

 

[Pablouk]

Decided against a bleed off point from Thermostat.

 

[Pablouk]

pipework done and tested.

 

[Pablouk]

new fairing will be something like this but narrower.

 

[Pablouk]

Side lights now

 

[Pablouk]

Side lights, reflector installation on rear and starting work on new front fairing.

 

[Pablouk]

Working on new fairing design, I am going with one of the two headlights with two high beam smaller lamps either side plus a new location for indicators.