Ramair fitted

[dave64]

I just fitted the Ramair filter kit and removed the old air tubes and stuff . Did Triumph start with these and build a bike around them LOL . All i need now is some fine weather so i can get it to the tuner and have it tuned and dyno done .

 

[bruce aussie]

I'll be interested to see what dyno figures you get with the Tranzac pipe and Ramair. Hopefully no decel pop.

 

[cusso ken]

I just fitted the Ramair filter kit and removed the old air tubes and stuff . Did Triumph start with these and build a bike around them LOL . All i need now is some fine weather so i can get it to the tuner and have it tuned and dyno done .

G'day Dave, is it as bad as the throttle body set up on the 109s, I took one look at my rocket set up when I put the K&N in, popped the new filter in and put the lid back on the filter box ,and made a note to leave well enough alone, I used to suffer from Tinkeritus (the urge to tinker with things) but have cured myself after a few disasters,

 

[dave64]

Ken most likely easier than the Boulevard but still a pain in the a$$ , Bruce i can't even get out for a ride its pissen down here at the moment , but i will be booking her in next week for sure .

 

[bruce aussie]

You need to move north, starting to look like a drought up here. The odd cool morning down to about 5c but cloud free blue sky days around 24c. Haven't had any serious rain this year.

 

[dave64]

Just picked up the bike from the dyno runs good but still got the pop ****en . He said he tryed a few different things but still there , on the short ride back to work doesn't seem as bad but time will tell .

 

[dave64]

we rode into the footy today on the freeway bike feels smooth at 100kph , it feels like the torque is not down low like the standard pipes maybe the 3into1 has a different curve to it

 

[Rough-but-slow]

Do you get any intake noise Dave? I'm interested as I just removed my intake to sync the throttle butterflys & OMG that intake is one of the worst designed pieces of rubbish I have ever worked on. Will go to K&N's or Ramair setup as soon as possible me thinks.

 

[TOMCAT]

I asked the same question a while back Roughy .. was told the induction noise was as bad as the short under-claw triple K&N filters. You are right about that 'plumbing' it's a nightmare of a design.

 

[Rough-but-slow]

I think I could put up with a bit of noise. Those plastic housings really don't seem to seal well getting the angles right to get them together is very poor. It's surprising because 3 pod filters must cost less than that un-godly arrangement to manufacture best put it on Mitch's thread of things to change on a rocket.